Moray · Scotland
Bath chip & crack repair in Buckpool, Moray
Problem with your bath in Buckpool? We repair it in place, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- A chip where the taps sit
About our bath repair in Buckpool
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Our repair technicians work on roll-top & freestanding, whirlpool & spa baths and acrylic, and the jobs we see most are chips caused by builders and a kit repair that didn’t last.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Area
- Buckpool (AB56)
- County
- Moray
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
For anyone letting property in or around Buckpool, we will quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
Before we arrive
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Advice
Our work in Buckpool
Buckpool is about 3 miles north-east of Buckie, in Moray. From the centre of Buckpool to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Buckpool is one of 58 towns and villages in Moray we cover.
Our visits in AB56 work the same way as everywhere else we cover. Jobs here include addresses on Main Street, Station Road and Craigview. We also travel to Findochty (1 mile south), Portknockie (2 miles east), Portessie (2 miles south-west), Rathven (2 miles south-west) and Ianstown (2 miles south-west). We also work in nearby towns such as Buckie (3 miles south-west), Lossiemouth (14 miles west), Keith (11 miles south), Ashgrove (15 miles west), Fochabers (10 miles south-west) and Lhanbryde (13 miles west). If you’re somewhere remote, ring us first and we’ll plan the trip.
Near you in Buckpool
In Buckpool, that means homes near Church Of Scotland, among other places. Nearby you will also find Findochty Castle (0.9 miles south-west) and Seafield Hospital (3.8 miles south-west).
How to care for the repair
How the surface is treated afterwards matters:
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Don’t leave a fresh chip for long
- Check that an acrylic bath doesn’t move when you stand in it
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Signs you need bath repair in Buckpool
Rust typically starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for any of the following:
- Chips under the taps
- A cracked acrylic bath
- Chips along the edge of the bath
- Rust by the waste and overflow
What your quote should include
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
- How the colour is matched
- Who will actually do the work
FAQs for Buckpool
Do you work in Buckpool?
Yes. We cover the whole UK and come to Buckpool. Send pictures and we will quote, or call 0345 017 0787.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
Is there a call-out fee?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Do you cover the whole of Moray?
Everywhere in the UK, Buckpool included. Travel is included in the price.
Something went through my bath. Can it be fixed?
Typically. Photos of the hole and the underside help us check.
More services for Buckpool
What bath repair costs
Repairs from £95. We price every job individually. What matters most is:
- The colour and finish to match
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- The material
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Repairing versus replacing in Buckpool
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Our prices are the same across the UK, with no extra for Buckpool. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- We leave the room as we found it
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- No need to remove anything
Take a look at our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
