Moray · Scotland
Bath chip & crack repair in Cullen, Moray
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Cullen, with a one-year guarantee on every repair.
- Repairs from £95
- Rusty patches near the plughole
- Damage done while the bathroom was being fitted
Why repair rather than replace?
Replacing a fitted bath typically means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Cullen. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Fixed prices from your pictures
- One price list for the whole UK
- We’ll tell you if it’s not worth repairing
- Every repair guaranteed for a year
See our pricing and resurfacing vs replacement cost guide.
Bath repair in Cullen without replacing anything
Chips, cracks, rust spots and small holes is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the repaired area is colour matched so it blends in. Common call-outs are for a chipped rim or side and a cracked acrylic bath, in whirlpool & spa baths, acrylic and pressed steel enamel.
All our work comes with our one-year guarantee, wherever you are in Moray.
- Where
- Cullen (AB56)
- Area hub
- Moray
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
It helps to know what we cannot do too:
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
Send us pictures and we will tell you honestly before booking.
Materials we work on in Cullen
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
The process
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a morning or an afternoon. Before we go, we will explain when it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the day after, the bath is ready to use.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Move bottles, mats and clutter away from the area
Getting a price
For a price in Cullen, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Landlord and trade work in Cullen
We work for landlords, letting agents and housing providers in Cullen as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Cullen
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
The things customers typically mention when they call are:
- A hole punched through by something heavy
- Snagging damage from a refit
- Deep scratches in acrylic
- A chip where the taps sit
What your quote should include
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
- How long the guarantee is and what it covers
- Aftercare advice
Our work in Cullen
Cullen is about 6 miles east of Buckie, in Moray. Customers in Cullen get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Our technicians cover all 58 towns and villages across Moray.
We cover every part of AB56. We regularly work on streets such as The Square, Station Road and Old Church Road. Cullen sits on or near the A98, which makes travel easy. If you are just outside Cullen, we cover Lintmill (1 mile south), Portknockie (2 miles north-west), Sandend (3 miles east), Buckpool (3 miles west) and Findochty (3 miles west). Further out, we also cover Buckie (6 miles west), Keith (11 miles south-west), Fochabers (12 miles south-west), Ianstown (5 miles west), Lhanbryde (15 miles west) and Portessie (5 miles west). Cullen is one of the larger places we cover in Moray. Remote and island addresses take a little more planning, so call us to arrange it.
Near you in Cullen
Our customers here include homes close to Auction House. A little further out are Fordyce Joiner's Workshop (3.4 miles south-east) and castle 30m NNW of Inaltry (2.5 miles south). Open spaces near Cullen include Durn Hill.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Avoid scourers, wire wool and gritty cream cleaners
- Have new chips seen to early
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Your questions about bath repair in Cullen
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
How much does bath repair cost in Cullen?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your AB56 postcode.
Do you cover the entire of Moray?
Everywhere in the UK, Cullen included. There is no extra charge for travel.
Is a bath repair durable?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Other services in Cullen
What bath repair costs
Repairs from £95. There’s no charge for travel to Cullen. The price comes down to:
- Whether old repairs or coatings need taking off
- The type of damage
- Doing more than one item at once
- How easy the damage is to reach
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Quotes from your photos
You can usually get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- Details of any past repairs
- What it’s made of, if you know
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
