Cornwall · England
Bath Repair in Bugle
Fixed-price bath repair in Bugle and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Bath repair in Bugle without replacing anything
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. We’re often asked to fix chips along the edge of the bath and a chip where the taps sit, in roll-top & freestanding, acrylic and whirlpool & spa baths.
Every job is backed for twelve months in Bugle and everywhere else. If something goes wrong with the work, we come back.
- Location
- Bugle (PL26)
- Area hub
- Cornwall
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. We price every job individually. The main factors are:
- Unusual colours or finishes
- The size and number of damaged areas
- Whether we combine several jobs
- Previous DIY repairs that have to come out
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before booking.
How to get a fixed price
Before you send pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- What it’s made of, if you know
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
FAQs for Bugle
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you do more than one item on the same visit?
Of course, and it normally saves money. Send pictures of everything together and we will quote them together.
Are there extra charges for Bugle?
No. Our quotes include travel, and we charge the same wherever you are.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Do you work in Bugle?
We do. We send a technician to Bugle for every job, with no extra charge for travel.
Our work in Bugle
Bugle is about 4 miles north of St Austell, in Cornwall. Clients in Bugle get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. Bugle is one of 644 places in Cornwall we cover.
Our visits in PL26 are booked in the same way as anywhere else. Jobs here include addresses on Station Road, Parkventon and Molinnis Road and the roads around them. If you’re just outside Bugle, we cover Carnsmerry (1 mile south-west), Stenalees (1 mile south), Penwithick (2 miles south), Treverbyn (2 miles south) and Luxulyan (2 miles east). Larger places within reach include Truro (15 miles south-west), Newquay (12 miles west), St Austell (4 miles south), Bodmin (6 miles north-east), Liskeard (15 miles east) and Sandy Bottom (4 miles south).
Local landmarks in Bugle
Locally, our jobs take us to homes close to Bugle School. Bugle has its own railway station: Bugle station. Other landmarks nearby include Luxulyan Museum And Heritage Centre (2 miles east) and St Austell Community Hospital (5 miles south). For a walk, there’s Tresayes Quarry and Hensbarrow Beacon.
What else we do in Bugle
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repairing versus replacing in Bugle
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Bugle. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Bugle
- One price list for the whole UK
- Colour mixed on the day to match
- Nothing taken out or refitted
- One visit for most repairs
Read our full price list or resurfacing vs replacement cost guide.
When to call us in Bugle
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Clients usually contact us about:
- A chipped rim or side
- Hairline or through cracks in acrylic
- Chips under the taps
- Scratches you can feel with a fingernail
What your quote should include
- A fixed quote, and whether VAT is included
- Whether the price covers travel
- What protection goes down before work starts
- How long it needs to cure
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
How the visit works
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, depending on the damage, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
Getting a price
To get a price, send a couple of photos using our quote form or call us. We will say straight away if a repair is the right fix.
Advice
Aftercare tips
Most damage we see is avoidable. These habits help:
- Store metal items away from the bath
- A dripping tap stains enamel, so fix it early
- Have new chips seen to early
- Put a towel in the bath if you’re working above it
There is nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
