Norfolk · England

Bath chip & crack repair in Bunwell, Norfolk

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bunwell, with a one-year guarantee on every repair.

  • Repairs from £95
  • A hole punched through by something heavy
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Bunwell

Looking after it afterwards

It’s all simple stuff, just a few sensible habits:

  • Put a towel in the bath if you are working above it
  • Don’t leave razors or cans standing in the bath
  • Fix dripping taps early to stop staining and limescale
  • Give the bath a quick rinse after use

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

Bath repair at your home in Bunwell

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. We work on cast iron enamel, pressed steel enamel and acrylic, and common reasons people contact us are a hole punched through by something heavy and chips caused by builders.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Rusty chip next to a bath plughole, before and after repair
Location
Bunwell (NR16)
Region
Norfolk
Cover
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Honest limits

Before booking, it’s worth knowing the limits too:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Rust that has eaten right through a steel bath
  • A bath worn all over, where resurfacing makes more sense

If in doubt, send photos and we will say what we think.

Materials we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

How it works

We work cleanly and quietly. Protection goes down first, then the work takes a few hours, depending on the damage. Before we leave, we explain how soon it can be used and how to care for it.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can usually use the bath the next day.

Getting ready for the visit

  • Ensure the area is dry
  • Let us know which floor the room is on
  • Point us to the nearest place to park

Getting a price

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Send pictures for a quote

Related advice

Common problems we fix in Bunwell

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

The most common problems we’re called about are:

  • Chips under the taps
  • Chips along the edge of the bath
  • Scratches you can feel with a fingernail
  • A hole punched through by something heavy

What to look for in a quote

  • Whether there are any call-out or travel charges
  • Who will actually do the work
  • How the colour is matched
  • What protection goes down before work starts

10 questions to ask before you book

Why repair rather than replace?

People frequently assume a cracked or chipped bath has to come out. Generally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there is no premium for Bunwell. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • Same prices wherever you are
  • CHAS and Constructionline accredited
  • Honest advice, even when it means no job
  • Fixed prices from your pictures

Take a look at our prices page or resurfacing vs replacement cost guide.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Common questions in Bunwell

Will the price change on the day?

Your quote covers the damage in the pictures. Anything extra is discussed before we begin.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.

Can you fix rust around the plughole?

Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.

Can you repair several things at once?

Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

How quickly can you book me in?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Do I need to be at home?

We need someone to let us in. You do not need to watch us work.

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Bunwell and the surrounding area

Bunwell is about 5 miles east of Attleborough, in Norfolk. Whether you are in the middle of Bunwell or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 797 towns and villages across Norfolk.

Our technicians cover all of the NR16 postcode area and the streets around it. Whether you live on Greenways, Bunwell Street and Rectory Lane or anywhere nearby, we can come to you. If you are just outside Bunwell, we cover Cordwell (1 mile east), Carleton Rode (1 mile west), Bunwell Hill (1 mile south), Hargate (1 mile south) and Cargate Common (2 miles south). We also work in nearby towns such as Norwich (12 miles north-east), Dereham (15 miles north-west), Wymondham (5 miles north), Sprowston (14 miles north-east), Thorpe St Andrew (13 miles north-east) and Attleborough (5 miles west).

Landmarks near Bunwell

We visit homes around Church of St Michael and Bunwell Primary School. Bunwell’s nearest station is Spooner Row station, about 3 miles north-west of the centre. Nearby you’ll also find Forncett Industrial Steam Museum (2.8 miles east) and Bickley Day Hospital (4.7 miles west).

Map of Bunwell © OpenStreetMap contributors

What affects the price in Bunwell

Prices start from £95. Every quote is fixed and free. What we take into account:

  • Previous DIY repairs that have to come out
  • The type of damage
  • The material
  • The size and number of damaged areas

No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

Quotes from your photos

When you take your pictures, these tips help us give you a firm price:

  • A wider photo showing the whole bath
  • What it’s made of, if you know
  • A clear, close picture of the problem area
  • Your postcode, so we can check dates

For a price in Bunwell, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.