Wiltshire · England
Bath chip & crack repair in Burbage, Wiltshire
Local bath repair for Burbage: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Rust by the waste and overflow
Bath repair in Burbage without replacing anything
Most of our bath repairs take a few hours, and you can generally bathe again the following day. There is no need to book a plumber or tiler, because nothing is disconnected. Our repair technicians work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are a cracked acrylic bath and damage beneath the taps.
Every repair is covered by a one-year guarantee, wherever you are in Wiltshire.
- Where
- Burbage (SN8)
- Region
- Wiltshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Burbage
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Are there extra charges for Burbage?
There’s no separate call-out charge. Your fixed price includes everything.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Can you fix rust around the plughole?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- Acrylic cracks with no access behind them
Send us pictures and we will tell you honestly.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Stick to mild cleaners and a soft cloth
- Don’t leave razors or cans standing in the bath
- Avoid scourers, wire wool and gritty cream cleaners
- Give the bath a quick rinse after use
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Our work in Burbage
Burbage is about 13 miles north-west of Andover, in Wiltshire. Whether you are in the middle of Burbage or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Burbage is one of 425 towns and villages in Wiltshire we cover. Our nearest city page is London, about 69 miles away.
Postcode districts we cover here: SN8. Jobs here include addresses on High Street, Eastcourt and Seymour Gardens and the roads around them. Other places close to Burbage include Wulfhall (1 mile east), East Grafton (2 miles east), Wilton (2 miles east), Aughton (3 miles south) and Great Bedwyn (4 miles north-east). Further out, we also cover Devizes (14 miles west), Amesbury (13 miles south), Marlborough (5 miles north-west), Bulford (12 miles south), Pewsey (4 miles west) and Durrington (12 miles south-west).
Local landmarks in Burbage
In Burbage, that means homes near Church of All Saints, Burbage Primary School and Church of All Saints. The nearest railway station is Bedwyn station, about 3.6 miles north-east of the centre. Further afield, we also cover the area around Bedwyn Stone Museum (3.2 miles north-east) and Savernake Hospital (4.7 miles north).
Repairing versus replacing in Burbage
Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair deals only with the damage in one visit. Prices start from £95. There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Rooms protected and left tidy
- One-year guarantee on every repair
- Accredited with CHAS, Constructionline and SafeContractor
- Straight answers about what a repair can do
See our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Signs you need bath repair in Burbage
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Chips on the rim or sides
- Chips caused by builders
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
Before booking anyone
- Whether a trained technician does the job
- How changes to the job are handled
- What prep work is covered
- A fixed quote, and whether VAT is included
What we do, step by step
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. It generally takes two to three hours for most chips, and you can get on with other things while we’re there.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
How to get a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We work for landlords, letting agents and housing providers in Burbage as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Towns and villages near Burbage
What else we do in Burbage
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
