Wiltshire · England
Bath chip & crack repair in Aughton, Wiltshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Aughton. Send photos for a free, fixed quote.
- Repairs from £95
- Holes from dropped items
- Cracks in an acrylic bath
Bath repair at your home in Aughton
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Common call-outs are for rust spots around the plughole and snagging damage from a refit, across roll-top & freestanding, acrylic and pressed steel enamel.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Aughton (SN8)
- Region
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Covering Aughton
Aughton is about 10 miles north-west of Andover, in Wiltshire. From the centre of Aughton to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover 425 places across Wiltshire, from the larger towns to small villages. You can also see our page for London, about 69 miles away.
All of SN8 is within our area, from the main roads to the quietest streets. From Ham Close and Cuckoo Pen Close or anywhere nearby, we can come to you. Neighbouring places we cover include East Grafton (3 miles north-east), Burbage (3 miles north), Wulfhall (3 miles north), Wilton (4 miles north-east) and Great Bedwyn (6 miles north-east). Within a short drive, we also cover Devizes (14 miles west), Amesbury (11 miles south-west), Marlborough (8 miles north), Old Sarum (15 miles south), Bulford (9 miles south-west) and Pewsey (5 miles north-west).
Landmarks near Aughton
Around Aughton, we work in homes near Church of St Mary and the streets around them. Further afield, we also cover the area around Ludgershall Castle (3.6 miles south-east).
Nearby places to Aughton
Also in Aughton
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Repair or replace: which is better?
Replacing a fitted bath normally means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. A repair deals only with the damage in one visit. Our bath repair starts from £95. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
What you get with us
- Colour mixed on the day to match
- A fixed quote before booking
- Most jobs done in one visit
- We come to you, anywhere in the UK
Take a look at our full price list and guide to resurfacing and replacement costs.
Common questions in Aughton
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you come to Aughton?
Yes, we do. Repair technicians travel to Aughton from across the region, and the price is the same as everywhere else.
Something went through my bath. Can it be fixed?
Typically. Send us a photo of the hole and one from under the bath if you can.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Can you quote from pictures?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Signs you need bath repair in Aughton
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex.
Most people contact us after spotting something like this:
- Damage beneath the taps
- A kit repair that didn’t last
- Snagging damage from a refit
- Chips on the rim or sides
Before booking anyone
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
- How the colour is matched
- Whether the price covers travel
How it works
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. Most visits take a few hours, depending on the damage.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the day after, the bath is ready to use.
Before we arrive
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Clear toiletries, mats and anything else from around the area
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair won’t do:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
Keeping it looking good
Nothing complicated is needed:
- Clean with warm water and a mild detergent
- Avoid scourers, wire wool and gritty cream cleaners
- Check that an acrylic bath doesn’t move when you stand in it
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
