Cumbria · England
Bath Repair for Burgh-by-Sands homes
Bath repair in Burgh-by-Sands without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Repairs from £95
- Chips on the rim or sides
- A chip where the taps sit
How we handle bath repair in Burgh-by-Sands
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We work on roll-top & freestanding, whirlpool & spa baths and cast iron enamel, and the jobs we see most are a hole punched through by something heavy and rust by the waste and overflow.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Burgh-by-Sands (CA5)
- Area hub
- Cumbria
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
FAQs for Burgh-by-Sands
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you repair a hole in a bath?
Normally. Send us a picture of the hole and one from under the bath if you can.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
What areas do you cover?
We cover the whole UK, including Burgh-by-Sands and the rest of Cumbria. Just include your postcode and we’ll offer you dates.
Signs you need bath repair in Burgh-by-Sands
A cracked acrylic bath usually wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move.
Keep an eye out for these signs:
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
- A failed DIY repair that’s discoloured or lifting
What your quote should include
- What preparation is included
- What the guarantee covers, and for how long
- Who turns up on the day
- Is the price fixed, and does it include VAT?
Landlords, agents and businesses in Burgh-by-Sands
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Where we work around Burgh-by-Sands
Burgh-by-Sands is about 5 miles north-west of Carlisle, in Cumbria. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 438 towns and villages in Cumbria. Our jobs stretch from Burgh-by-Sands to Newcastle upon Tyne (about 56 miles away).
Jobs in CA5 work the same way as everywhere else we cover. Whether you live on Station Road, King Edwards Fauld and Aballava Way or a nearby road, we can come to you. If you’re just outside Burgh-by-Sands, we cover North End (1 mile north), Moorhouse (1 mile south), Thurstonfield (2 miles south), Kirkbampton (2 miles south-west) and Cargo (2 miles east). We also work in nearby towns such as Carlisle (5 miles south-east), Currock (6 miles south-east), Raffles (4 miles south-east), Botcherby (6 miles south-east), Morton (4 miles south-east) and Wigton (8 miles south-west).
Near you in Burgh-by-Sands
Our clients here include homes close to St Michael's Church, Burgh by Sands School and The Greyhound Inn. Nearby you’ll also find Cumberland Infirmary (4.1 miles south-east) and Burgh by Sands Castle (0.7 miles east). Open spaces near Burgh-by-Sands include Thurstonfield Lough.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- How many areas need work
- The material and finish
- Whether we combine several jobs
- The colour and finish to match
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send photos for a quote
Two or three clear photos are usually enough. It helps if you send:
- Something in shot to show the size
- Natural light rather than flash
- What it’s made of, if you know
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Repair or replace in Burgh-by-Sands?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Burgh-by-Sands customers choose us
- One price list for the entire UK
- Rooms protected and left tidy
- One visit for most repairs
- Fixed prices from your pictures
Take a look at our pricing and guide to resurfacing and replacement costs.
Towns and villages near Burgh-by-Sands
Other services in Burgh-by-Sands
What happens on the day
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow two to three hours for most chips.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Open a window if you can
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say straight away whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
