Hampshire · England
Bath chip & crack repair in Burkham, Hampshire
Bath repair in and around Burkham: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rust spots around the plughole
- Chips along the edge of the bath
Bath repair at your home in Burkham
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We’re frequently asked to fix chips on the rim or sides and rusty patches near the plughole, on cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Burkham (GU34)
- Region
- Hampshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Burkham
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Do you need bath repair in Burkham?
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
Signs it’s time to call us include:
- Rusty patches near the plughole
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
- Cracks in an acrylic bath
Comparing quotes
- Aftercare advice
- How the colour is matched
- Whether a trained technician does the job
- How long the guarantee is and what it covers
Also in Burkham
The process
We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and we start. You can expect it to take a few hours, depending on the damage.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Ensure the room can be ventilated
- Keep a parking space free if you can
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
Related advice
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we look at:
- Access to the area
- Unusual colours or finishes
- Whether we combine several jobs
- The material and finish
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- One sharp close-up of the damage
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Send us a photo of the damage and one of the entire item, and tell us you are in Burkham, and we will reply with a fixed price.
Looking after it afterwards
So the finish stays in good condition:
- Keep metal cans and razors off the surface
- Clean with warm water and a mild detergent
- Don’t scrub with anything abrasive
- Get any new chip repaired before it rusts
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Your questions about bath repair in Burkham
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
How soon can you come?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How invisible is a bath repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Can you repair several things at once?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
How much does bath repair cost in Burkham?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Where we work around Burkham
Burkham is about 4 miles north-west of Alton, in Hampshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Burkham is one of 683 places in Hampshire we cover. You can also see our page for London, about 47 miles away.
We cover every part of GU34. We also cover the places around Burkham: Bagmore (1 mile north-east), Bradley (1 mile south-west), Southrope (2 miles north-east), Bentworth (2 miles south) and Holt End (2 miles south). Further out, we also cover Basingstoke (6 miles north), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (14 miles east) and Alton (4 miles south-east).
Near you in Burkham
For rail, the closest station is Alton station, about 4.7 miles south-east. A little further out are Barton Castle (3.7 miles south-west) and Alton Community Hospital (4.4 miles south-east). Not far away are Farleigh Hill.
When a repair is not the answer
Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
- Acrylic cracks with no access behind them
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
About our accreditations · Every repair comes with a one-year guarantee.
