North Yorkshire · England
Bath chip & crack repair in Burneston, North Yorkshire
Local bath repair for Burneston: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Chips along the edge of the bath
Prices and what affects them
Repairs from £95. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- The material and finish
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
We price nearly every job from pictures. This is what to send:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- One picture of the entire bath
- What it’s made of, if you know
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed price, not an estimate.
Bath repair at your home in Burneston
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We work on whirlpool & spa baths, acrylic and cast iron enamel, and common reasons people get in touch are impact holes in acrylic and damage done while the bathroom was being fitted.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Burneston (DL8)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Burneston
Burneston is about 7 miles south-west of Northallerton, in North Yorkshire. Across the DL8 area, a technician comes to you. We cover 626 places in North Yorkshire, from the larger towns to small villages. Our jobs stretch from Burneston to Leeds (31 miles away).
Here we cover the DL8 postcode area. Whether you live on Manor House Walk, Back Lane and Hartley Vale or a nearby road, a technician can come to you. We also travel to Carthorpe (1 mile south), Exelby (1 mile north-west), Londonderry (2 miles north), Leeming (2 miles north) and Kirklington (2 miles south). Larger places within reach include Ripon (9 miles south), Catterick Garrison (11 miles north-west), Northallerton (7 miles north-east), Richmond (13 miles north-west), Thirsk (8 miles east) and Colburn (10 miles north-west).
Near you in Burneston
In Burneston, that means homes near Burneston Church of England Voluntary Aided Primary School and Church of St Lambert, among other places. Other landmarks nearby include Snape Castle (2.9 miles west) and Bedale Museum (3.4 miles north-west).
How the visit works
We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Let us know which floor the room is on
- Make sure the area is dry
- Have a window or extractor fan available
Getting a price
Send us pictures of the damage and one of the entire item, and tell us you are in Burneston, and we’ll come back with a fixed quote.
Advice
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Landlords, letting agents and housing providers in Burneston use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Cracks in acrylic we cannot reach from underneath
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer before booking.
Surfaces we repair
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Your questions about bath repair in Burneston
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Which areas do you work in?
The whole UK, including all of North Yorkshire. Just include your postcode and we’ll confirm dates.
What does bath repair cost?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
When can I have a bath again?
Usually within a day, depending on the repair.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Why book with us
- Every repair guaranteed for a year
- Usually one visit, start to finish
- Colour-matched on site
- We’ll tell you if it’s not worth repairing
Read our pricing or resurfacing vs replacement cost guide.
Places near Burneston
More services for Burneston
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Rinse the bath after use, especially in hard water areas
- Avoid scourers, wire wool and gritty cream cleaners
- Get any new chip repaired before it rusts
- Ensure an acrylic bath is firm underfoot
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
About our accreditations · Every repair comes with a one-year guarantee.
