Hertfordshire · England

Bath Repair for Burnham Green homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Burnham Green and across Hertfordshire. Send photos for a free, fixed quote.

  • Repairs from £95
  • Chips caused by builders
  • A chipped rim or side
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Burnham Green

Bath repair at your home in Burnham Green

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for cracks in an acrylic bath and rusty patches near the plughole, on roll-top & freestanding, acrylic and cast iron enamel.

Whatever the size of the job, it’s backed by a one-year guarantee.

Where
Burnham Green (AL6)
County
Hertfordshire
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

How we price bath repair

Repairs from £95. There is no charge for travel to Burnham Green. The price depends on:

  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • How hard the colour is to match
  • The size and number of damaged areas

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send pictures for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • Where you are, by postcode
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • A picture taken from further back

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

What we do, step by step

You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take two to three hours for most chips, and you are welcome to carry on with your day while we work.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, normally by the day after, the bath is ready to use.

How to prepare

  • Make sure the room can be ventilated
  • Point us to the nearest place to park
  • Let us know if it has been repaired before

Ask for a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.

Get a free quote

Related advice

When to call us in Burnham Green

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

The most common problems we’re called about are:

  • Chips along the edge of the bath
  • Damage done while the bathroom was being fitted
  • A cracked acrylic bath
  • Holes from dropped items

What your quote should include

  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?
  • When it can be used again
  • The length of the guarantee and what it covers

Choosing a repair company

Common questions in Burnham Green

How long before I can use the bath?

Normally by the following day, though it depends on what we have done.

Can you quote from pictures?

In nearly every case. If pictures do not show enough, we’ll ask for another angle.

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Will it make a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

Are there extra charges for Burnham Green?

Travel is included in the price, with the same prices everywhere we work.

Is it OK to have pets in the house?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

Is a holed acrylic bath repairable?

Usually, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

Repair or replace in Burnham Green?

Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Burnham Green clients choose us

  • Colour-matched on site
  • Everything repaired in place
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work

Take a look at our pricing or guide to resurfacing and replacement costs.

Different materials, different repairs

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

Burnham Green and nearby

Burnham Green is about 3 miles north-east of Welwyn Garden City, in Hertfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 381 places across Hertfordshire, from the larger towns to small villages. Our jobs stretch from Burnham Green to London (about 23 miles away).

Here we cover the AL6 postcode area. Streets in the area include Burnham Close, Burgess Close and Burnham Green Road. Close by, we cover Tewin Wood (1 mile south-east), Harmer Green (1 mile west), Bull's Green (1 mile north-east), Tewin (1 mile south-east) and Oaklands (1 mile north-west). We also work in nearby towns such as Watford (15 miles south-west), Hemel Hempstead (14 miles south-west), Stevenage (5 miles north), St Albans (9 miles south-west), Bishop's Stortford (14 miles east) and Welwyn Garden City (3 miles south-west).

Local landmarks in Burnham Green

In Burnham Green, that means homes near Belmont pub and Monk's Walk School, among other places. For rail, the closest station is Welwyn North station, about 1.2 miles south-west. Nearby you’ll also find Datchworth Museum (1.1 miles north) and Queen Elizabeth II Hospital (3.6 miles south). Not far away are Tewin Orchard and Hopkyns Wood.

Map of Burnham Green © OpenStreetMap contributors

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • Cracks in acrylic we can’t reach from underneath
  • Leaking fittings, which need a plumber
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in Burnham Green

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Put a towel in the bath if you’re working above it
  • Keep metal cans and razors off the surface

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.