Warwickshire · England

Bath Repair in Burton Green

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Burton Green. Free, fixed quotes from your photos.

  • Repairs from £95
  • Rust spots around the plughole
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Burton Green

How we handle bath repair in Burton Green

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. We regularly repair pressed steel enamel, acrylic and whirlpool & spa baths, and common reasons people contact us are damage done while the bathroom was being fitted and cracks in an acrylic bath.

A one-year guarantee comes as standard.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Burton Green (CV8, CV4)
Area hub
Warwickshire
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

How the visit works

We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. It normally takes a few hours, and we will tell you if anything changes.

  1. We start by cleaning the damage and taking out loose enamel and rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the following day.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Open a window if you can
  • Let the surface dry out before the visit

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.

Send pictures for a quote

Advice

About Burton Green

Burton Green is about 3 miles north-west of Kenilworth, in Warwickshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Burton Green is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 14 miles away.

Every address in CV8 and CV4 is covered, from the main roads to the quietest streets. We regularly work on streets such as Maple Lane, Beech Court and Holly Court. We also travel to Beechwood (1 mile north-west), Carol Green (2 miles north-west), Meer End (2 miles south-west), Balsall Common (2 miles north-west) and Honiley (2 miles south-west). Larger places within reach include Rugby (15 miles east), Nuneaton (12 miles north-east), Warwick (7 miles south), Royal Leamington Spa (7 miles south-east), Stratford-upon-Avon (13 miles south) and Bedworth (9 miles north-east).

Landmarks near Burton Green

Typical jobs here are in homes near Burton Green Church of England Academy, Church of the Holy Transfiguration and WMG Academy for Young Engineers. Burton Green’s nearest station is Tile Hill station, roughly 1.3 miles north. Further afield, we also cover the area around Ford's Hospital (4.5 miles north-east) and Kenilworth Abbey Barn Museum (2.2 miles south-east). The countryside around Burton Green includes Oxpen Meadow Lake.

Map of Burton Green © OpenStreetMap contributors

When we would advise against a repair

Some jobs are not right for a repair, including:

  • A bath worn all over, where resurfacing makes more sense
  • A steel bath rusted through
  • Leaks from the waste or overflow fittings (a plumber’s job)

If in doubt, send photos and we will say what we think before booking.

Materials we repair

  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths

Repairs by material

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Repair or replace: which is better?

People often assume a cracked or chipped bath has to come out. Typically it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Burton Green. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • CHAS and Constructionline accredited
  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK
  • No extra charge for your area

Take a look at our pricing or bath cost comparison.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

FAQs for Burton Green

Will the price change on the day?

Your quote covers the damage in the pictures. If there’s more, we’ll tell you before starting.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Can a cracked acrylic bath be fixed?

Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.

Do the materials smell?

Expect a mild smell while we are working, which fades afterwards.

Can you repair a failed DIY repair?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

Is a bath repair durable?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

When to call us in Burton Green

Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.

Typical reasons for a call-out include:

  • A hole punched through by something heavy
  • A chip where the taps sit
  • A chipped rim or side
  • Scuffs and scratches in the surface

Questions to ask before you book

  • Whether the price is fixed and includes VAT
  • What prep work is covered
  • How soon you can use it again
  • Aftercare advice

Our hiring checklist

Aftercare tips

To keep it looking its best for years:

  • Put a towel in the bath if you are working above it
  • Get a dripping tap fixed promptly
  • Check that an acrylic bath doesn’t move when you stand in it
  • Clean with warm water and a mild detergent

A repaired bath needs no special treatment. Skip bleach and gritty creams.

Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Take it off before we arrive.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.