Warwickshire · England

Bath re-enamelling & resurfacing in Burton Green, Warwickshire

Full bath re-enamelling and resurfacing at your home in Burton Green, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Burton Green homes

Bath re-enamelling at your home in Burton Green

Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. We regularly repair acrylic baths, Victorian roll-tops and basins & shower trays, and common reasons people get in touch are an old resurfacing that’s failing and worn patches where water runs and sits.

All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Where
Burton Green (CV8, CV4)
County
Warwickshire
Cover
A year, on every repair
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Aftercare tips

Nothing complicated is needed, just a few sensible habits:

  • Wash away dyes and oils after use
  • Do not use the bath until it has fully cured
  • Clean with a soft cloth and mild detergent
  • Fix dripping taps quickly

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

What happens on the day

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take most of the day, and you’re welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Getting ready for the visit

  • Mention any parking restrictions or tricky access
  • Let us know which floor the room is on
  • Make sure the area is dry

Get a quote

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.

Get a fixed price

Read more

Honest limits

Some jobs are not right for a repair, including:

  • Plumbing leaks, which need a plumber
  • Steel that has corroded right through
  • A bath split right through the body

If in doubt, send photos and we will say what we think.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

Signs you need bath re-enamelling in Burton Green

Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.

Look out for any of the following:

  • A bath in a colour that no longer suits
  • An old resurfacing that is failing
  • Worn patches where water runs and sits
  • A dull, rough surface that will not come clean

Before you book anyone

  • How changes to the job are handled
  • How long the guarantee is and what it covers
  • Who will actually do the work
  • How soon you can use it again

How to compare quotes

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

Covering Burton Green

Burton Green is about 3 miles north-west of Kenilworth, in Warwickshire. Wherever you are in the CV8 postcode area, a technician comes to you. Our technicians cover all 324 towns and villages in Warwickshire, from the larger towns to small villages. We work right across the region, from Burton Green to Birmingham (14 miles away).

All of CV8 and CV4 is within our area. That includes homes on Maple Lane, Beech Court and Holly Court and the roads around them. Neighbouring places we cover include Beechwood (1 mile north-west), Carol Green (2 miles north-west), Meer End (2 miles south-west), Balsall Common (2 miles north-west) and Honiley (2 miles south-west). Within a short drive, we also cover Rugby (15 miles east), Nuneaton (12 miles north-east), Warwick (7 miles south), Royal Leamington Spa (7 miles south-east), Stratford-upon-Avon (13 miles south) and Bedworth (9 miles north-east).

What’s near Burton Green

In Burton Green, that means homes near Burton Green Church of England Academy, Church of the Holy Transfiguration and WMG Academy for Young Engineers and the streets around them. The closest station to Burton Green is Tile Hill station, about 1.3 miles north. Further afield, we also cover the area around Ford's Hospital (4.5 miles north-east) and Kenilworth Abbey Barn Museum (2.2 miles south-east). Green spaces nearby include Oxpen Meadow Lake.

Map of Burton Green © OpenStreetMap contributors

What affects the price in Burton Green

Prices start from £350. Prices are worked out job by job, from your photos. The main factors are:

  • Whether old repairs or coatings need taking off
  • Whether we combine several jobs
  • How much damage there is
  • What kind of damage it is

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • Your postcode, so we can check dates
  • One picture of the whole bath
  • A clear, close picture of the problem area
  • Any details about the material

To get a price, send two or three photos through our quote form or call us. We will say right away whether it can be repaired.

Repair or replace: which is better?

Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

Why Burton Green customers choose us

  • Accredited with CHAS, Constructionline and SafeContractor
  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • Same prices wherever you are

Read our full price list or bath cost comparison.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Questions from Burton Green

How long is the bath unusable?

Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Do you come to Burton Green?

Yes. We cover the entire UK and come to Burton Green. Send us pictures for a fixed quote, or call 0345 017 0787.

Does the bath have to be removed?

No, it stays where it is. We work on the bath in place, with the room protected and ventilated.

Is a repair better than a new one?

Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

How quickly can you book me in?

Your quote comes with available dates. Tell us if you need it done quickly.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.