Greater London · England

Bath Repair for Bushey Mead homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Bushey Mead and across Greater London. Free, fixed quotes from your photos.

  • Repairs from £95
  • A hole punched through by something heavy
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Bushey Mead

How we handle bath repair in Bushey Mead

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. Typical jobs include holes from dropped items and chips along the edge of the bath, across cast iron enamel, roll-top & freestanding and acrylic.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.

Where
Bushey Mead (SW20, SW19, SM4)
County
Greater London
Guarantee
One year on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Landlords, agents and businesses in Bushey Mead

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

For anyone letting property in or around Bushey Mead, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.

Why repair rather than replace?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • A year’s guarantee on all work
  • Honest advice, even when it means no job
  • No need to remove anything

Take a look at our full price list and resurfacing vs replacement cost guide.

Covering Bushey Mead

Bushey Mead is about 1 mile south-west of Wimbledon, in Greater London. We agree a date that works for you, and we’ll give you an arrival time in advance, so there is no waiting around. Bushey Mead is one of 764 towns and villages in Greater London we cover. Our jobs stretch from Bushey Mead to London (about 8 miles away).

Postcode districts we cover here: SW20, SW19 and SM4. Streets in the area include Gore Road, Edna Road and Wyke Road, and we cover them all. Bushey Mead is on the A298, so it’s easy for us to reach. We also cover the places around Bushey Mead: Wimbledon Chase (1 mile east), Raynes Park (1 mile south-west), Cannon Hill (1 mile south-east), Copse Hill (1 mile north-west) and West Barnes (1 mile south-west). We also work in nearby towns such as London (8 miles north-east), City of Westminster (8 miles north), Marylebone (8 miles north-east), Kensington (6 miles north), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).

Near you in Bushey Mead

In Bushey Mead, that means homes near Cannon Hill Common, Joseph Hood Primary School and Ursuline Preparatory School, among other places. Also close by are Dundonald Church (within half a mile north), The Edward Rayne pub (under half a mile west) and Harris Academy Wimbledon (under half a mile south-east). Bushey Mead has its own railway station: Raynes Park station. Well-known places in the area include Chessington Castle Hill (4.6 miles south-west) and Southside Wandsworth (3.4 miles north). Green spaces nearby include Cherry Wood and Henman Hill.

  • Parks and local facilities nearby include Municipal Borough of Malden and Coombe (1.7 miles west)
Map of Bushey Mead © OpenStreetMap contributors

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

How to care for the repair

After the repair has cured, a few habits help it last:

  • Give the bath a quick rinse after use
  • Avoid scourers, wire wool and gritty cream cleaners
  • Do not leave razors or cans standing in the bath
  • A dripping tap stains enamel, so fix it early

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.

How it works

We begin by going over the job with you, so there are no surprises. After that, protection goes down around the work area and the work begins. Allow a few hours, depending on the damage, and we will keep you posted as we go.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Clear the area around the damage
  • Plan for the room to be out of bounds to pets and children
  • Make sure the area is dry

How to get a price

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

Get a fixed price

Advice

Bushey Mead: your questions answered

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Can you repair something that is been repaired before?

Most of the time. Tell us what was done before and we will plan for it.

Can you quote from photos?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

How long before I can use the bath?

Normally the next day. We confirm the time before we leave.

Do the materials smell?

Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

Can landlords book you?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Is there a guarantee?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

What affects the price in Bushey Mead

Prices start from £95. There is no charge for travel to Bushey Mead. The price comes down to:

  • The size and number of damaged areas
  • How hard the colour is to match
  • What kind of damage it is
  • Whether we combine several jobs

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

How to get a fixed quote

When you take your photos, a few simple things make all the difference:

  • A wider photo showing the whole bath
  • Your postcode, so we can check dates
  • Daylight if possible, and no flash reflection
  • The material, if you know it

For a price in Bushey Mead, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What we cannot put right

We will always be straight with you, so here’s what a repair can’t fix:

  • Metal that has corroded all the way through
  • Water coming from the waste or taps rather than the bath
  • Cracks in parts of an acrylic bath we cannot get to from below

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.