Greater London · England
Bath Repair in Copse Hill
Chip and crack repairs to enamel, acrylic and cast iron baths in Copse Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- A cracked acrylic bath
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bath repair in Copse Hill without replacing anything
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Common call-outs are for cracks in an acrylic bath and holes from dropped items, on pressed steel enamel, cast iron enamel and acrylic.
All our work is covered by our one-year guarantee.
- Location
- Copse Hill (SW20, SW19)
- Area hub
- Greater London
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Copse Hill
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for any of the following:
- A chip where the taps sit
- Snagging damage from a refit
- Cracks in an acrylic bath
- Chips on the rim or sides
Questions to ask before booking
- What happens if they find more damage
- If travel is included in the price
- How long it needs to cure
- What preparation is included
Where we work around Copse Hill
Copse Hill is about 1 mile south-west of Wimbledon, in Greater London. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Copse Hill is one of 764 places in Greater London where we work. You can also see our page for London, about 8 miles away.
Every address in SW20 and SW19 is within our area, from the main roads to the quietest streets. That includes homes on Camp Road, Almer Road and Mckay Road. Nearby, we also work in Crooked Billet (1 mile north-east), Bushey Mead (1 mile south-east), Motspur Park (1 mile south-west), Wimbledon (1 mile north-east) and Raynes Park (1 mile south). Within a short drive, we also cover London (8 miles north-east), City of Westminster (7 miles north-east), Marylebone (8 miles north-east), Kensington (6 miles north), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).
Near you in Copse Hill
Locally, our jobs take us to homes close to Hollymount School, Ursuline Preparatory School and Cottenham Park and the streets around them. You’ll also find Crooked Billet pub (within half a mile north-east), The Norwegian School in London (less than half a mile east) and Christ Church (within half a mile east). For rail, the closest station is Raynes Park station, about 0.6 miles south. Other landmarks nearby include Atkinson Morley Hospital (under half a mile west) and Southside Wandsworth (3 miles north-east). Not far away are Kew Gardens Lake and Henman Hill.
- Other local spots include Coombe (1.4 miles west)
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Nearby places to Copse Hill
Also in Copse Hill
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Advice
Repair or replace in Copse Hill?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Colour-matched on site
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing or resurfacing vs replacement cost guide.
Copse Hill: your questions answered
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long before I can use the bath?
Usually the day after. We will tell you the exact curing time when we finish.
Do you cover Copse Hill?
Yes. We work across the UK and travel to Copse Hill. Send us photos for a fixed quote, or call 0345 017 0787.
What does bath repair cost?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a photo of the whole item with your SW20 postcode.
Landlords, agents and businesses in Copse Hill
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Prices and what affects them
Prices start from £95. There is no charge for travel to Copse Hill. The price comes down to:
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there’s no premium for Copse Hill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Send pictures for a quote
Two or three clear pictures are usually enough. Try to include:
- Something in shot to show the size
- A close-up of the damage, in focus
- What it’s made of, if you know
- Natural light rather than flash
To get a price, send a couple of pictures through our quote form or ring us. We will tell you honestly whether it can be repaired.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
Send us photos and we will tell you honestly before booking.
What we work on
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
