Staffordshire · England
Bath Repair in Cannock Wood
We travel to Cannock Wood for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- A kit repair that didn’t last
- Snagging damage from a refit
Our work in Cannock Wood
Cannock Wood is about 2 miles north of Burntwood, in Staffordshire. Wherever you are in the WS15 postcode area, we carry out the work at your property. Our repair technicians cover all 512 towns and villages across Staffordshire, from the larger towns to small villages. We work right across the region, from Cannock Wood to Birmingham (about 16 miles away).
Here we cover the WS15 postcode area. Streets in the area include Bradwell Lane, Sycamore Hill and Park Gate Road, and we cover them all. Close by, we cover Gentleshaw (1 mile south-east), Windmill Bank (1 mile east), Prospect Village (1 mile south-west), Cold Well (1 mile east) and Goosemoor Green (1 mile east). We also work in nearby towns such as Stafford (10 miles north-west), Burton upon Trent (14 miles north-east), Tamworth (12 miles south-east), Cannock (3 miles west), Lichfield (5 miles east) and Rugeley (3 miles north).
Landmarks near Cannock Wood
In Cannock Wood, that means homes near Gentleshaw Primary Academy, Chase Terrace Technology College and Christ Church. The closest station to Cannock Wood is Hednesford station, about 2.9 miles west of the centre. Other landmarks nearby include St Matthew's Hospital (2.5 miles south-east) and Cannock Castle Ring (within half a mile north). For a walk, there’s Minster Pool and George's Hayes.
Bath repair in Cannock Wood without replacing anything
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Common call-outs are for chips along the edge of the bath and damage done while the bathroom was being fitted, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.
All our work comes with a one-year guarantee.
- Area
- Cannock Wood (WS15)
- Region
- Staffordshire
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Towns and villages near Cannock Wood
What else we do in Cannock Wood
Common problems we fix in Cannock Wood
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for any of the following:
- Rust spots around the plughole
- A chipped rim or side
- Impact holes in acrylic
- A chip where the taps sit
What to look for in a quote
- Whether the colour is mixed to match
- Aftercare advice
- How your room will be protected
- Whether the price covers travel
Keeping it looking good
After the repair has cured, a few habits help it last:
- Get a dripping tap fixed promptly
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Keep metal cans and razors off the surface
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Questions from Cannock Wood
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Do you work in Cannock Wood?
Yes. We cover the entire UK and travel to Cannock Wood and the rest of Staffordshire. Send photos and we will quote, or call 0345 017 0787.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Landlords, agents and businesses in Cannock Wood
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will handle the rest.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a few hours, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
- Plan for the room to be out of bounds to pets and children
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repairing versus replacing in Cannock Wood
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. We charge the same wherever you are, so there is no premium for Cannock Wood. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- A year’s guarantee on all work
- Honest advice, even when it means no job
- A fixed quote before booking
- Technicians who travel to you, UK-wide
See our prices page and bath cost comparison.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
What bath repair costs
Repairs from £95. We charge the same across the UK, including Cannock Wood. What changes the price is:
- What kind of damage it is
- Any earlier repairs that need removing first
- The material
- Unusual colours or finishes
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Send photos for a quote
A couple of clear pictures is all it takes. Try to include:
- One picture of the entire bath
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
