Staffordshire · England
Bath chip & crack repair in Hazelslade, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Hazelslade, with a one-year guarantee on every repair.
- Repairs from £95
- Snagging damage from a refit
- Deep scratches in acrylic
Bath repair in Hazelslade without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the day after. There is no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for rust spots around the plughole and a chip where the taps sit, across roll-top & freestanding, whirlpool & spa baths and cast iron enamel.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Hazelslade (WS12)
- County
- Staffordshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Hazelslade
Something went through my bath. Can it be fixed?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
How long before I can use the bath?
Generally within a day, though it depends on what we have done.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
Can you price it without visiting?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
What happens next?
We review the pictures and send a fixed quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can you repair several things at once?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Places near Hazelslade
More services for Hazelslade
Why repair rather than replace?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- No extra charge for your area
- Work done at your home or business
- Most jobs done in one visit
- Rooms protected and left tidy
Read our full price list or bath cost comparison.
When a repair is not the answer
We will not take on work that won’t last, so these are the limits:
- A steel bath rusted through
- A bath that moves underfoot, until its support is fixed
- Leaking fittings, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
What happens on the day
Arrival times are agreed in advance, so you are not left guessing. On site, it takes two to three hours for most chips in most cases. We leave the room clean and you’ll know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Let us know about parking or access
How to get a price
For a price in Hazelslade, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Check that an acrylic bath doesn’t move when you stand in it
- Get any new chip repaired before it rusts
- Don’t scrub with anything abrasive
- Rinse the bath after use, especially in hard water areas
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Our work in Hazelslade
Hazelslade is about 2 miles north-east of Cannock, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Hazelslade is one of 512 towns and villages in Staffordshire we cover. Our nearest city page is Birmingham, about 17 miles away.
Every address in WS12 is within our area. Streets in the area include Jenkinstown Road, Valley Road and Barnfield Way, all of which we cover. Close by, we cover Rawnsley (1 mile south-west), Wimblebury (1 mile south-west), Prospect Village (1 mile south-east), Cannock Wood (1 mile east) and Gentleshaw (2 miles east). Further out, we also cover Stafford (9 miles north-west), Burton upon Trent (15 miles north-east), Tamworth (13 miles south-east), Lichfield (6 miles east), Rugeley (3 miles north) and Burntwood (3 miles south-east).
Near you in Hazelslade
Typical jobs here are in homes near St Peter's, Hazel Slade Primary Academy and Kingsmead School, among other places. The nearest railway station is Hednesford station, roughly 1.5 miles west. Further afield, we also cover the area around Cannock Chase Hospital (3 miles south-west) and Cannock Castle Ring (1.3 miles east). Open spaces near Hazelslade include George's Hayes.
Prices and what affects them
Prices start from £95. There’s no area surcharge for Hazelslade. The price reflects:
- The type of damage
- Any earlier repairs that need removing first
- How hard the colour is to match
- Access to the area
What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Photographing the damage takes a minute. Try to send:
- One picture of the whole bath
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Landlords, agents and businesses in Hazelslade
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access.
About our accreditations · Every repair comes with a one-year guarantee.
