Staffordshire · England

Bath Repair for Prospect Village homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Prospect Village, with a one-year guarantee on every repair.

  • Repairs from £95
  • Chips on the rim or sides
  • A failed DIY repair that is discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Prospect Village

How we handle bath repair in Prospect Village

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you’re dealing with rust spots around the plughole and an old repair that has yellowed or come loose, we can help, on roll-top & freestanding, pressed steel enamel and acrylic alike.

Whatever the size of the job, you get the same one-year guarantee.

Location
Prospect Village (WS12)
Region
Staffordshire
Guarantee
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Landlords, agents and businesses in Prospect Village

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Should I try a DIY kit first?

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

Honest limits

We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:

  • A steel bath rusted through
  • Cracks in acrylic we cannot reach from underneath
  • Flexing caused by a failed cradle or loose feet

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Prospect Village

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel

Repairs by material

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Prospect Village questions

How quickly can you book me in?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Do the materials smell?

There can be some smell while we work. It clears as the materials cure.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

When can I have a bath again?

Generally the day after. We confirm the time before we leave.

Will the price change on the day?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Is a repair better than a new one?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

Can you fix rust around the plughole?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Repair or replace: which is better?

People frequently assume a cracked or chipped bath has to come out. Usually it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.

Why choose Surface Doctor in Prospect Village

  • Colours mixed by hand to suit your surface
  • Same prices wherever you are
  • Fixed prices from your photos
  • One visit for most repairs

Read our prices page and guide to resurfacing and replacement costs.

How we price bath repair

Prices start from £95. We give every job a fixed quote from pictures. This is what makes a difference:

  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • The size and number of damaged areas
  • The type of damage

What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.

Send pictures for a quote

Good photos mean an accurate price. Here’s what we find most useful:

  • Natural light rather than flash
  • One picture of the entire bath
  • One sharp close-up of the damage
  • A coin or ruler next to the damage for scale

To get a price, send two or three pictures through our quote form or ring us. We will tell you honestly if a repair is the right fix.

Keeping it looking good

Once the work has cured, treat it gently:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Have new chips seen to early
  • Stick to mild cleaners and a soft cloth
  • Check that an acrylic bath does not move when you stand in it

A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams.

Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.

Prospect Village and nearby

Prospect Village is about 2 miles north-west of Burntwood, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 512 towns and villages in Staffordshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 16 miles away.

We work across the WS12 postcode area and the streets around it. Streets in the area include Danby Drive, Ironstone Road and Briars Way. Neighbouring places we cover include Cannock Wood (1 mile north-east), Rawnsley (1 mile north-west), Hazelslade (1 mile north-west), Gentleshaw (1 mile east) and Wimblebury (1 mile west). Larger places within reach include Stafford (10 miles north-west), Burton upon Trent (15 miles north-east), Tamworth (12 miles south-east), Cannock (3 miles west), Lichfield (5 miles east) and Rugeley (4 miles north).

Landmarks near Prospect Village

In Prospect Village, that means homes near Norton Canes High School, Christ Church and Holly Grove Primary School and the streets around them. The closest station to Prospect Village is Hednesford station, roughly 2.2 miles west of the centre. Well-known places in the area include Cannock Castle Ring (0.9 miles north-east) and St Matthew's Hospital (2.9 miles south-east). Open spaces near Prospect Village include George's Hayes.

Map of Prospect Village © OpenStreetMap contributors

How it works

We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes two to three hours for most chips. The room is left tidy.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Before we arrive

  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible
  • Avoid using the area for a few hours before we arrive

Getting a price

Email us pictures of the damage and a wider shot of the entire item, with your WS12 postcode, and we’ll reply with a fixed quote.

Get a free quote

Advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.