Cumbria · England
Bath chip & crack repair in Carleton, Cumbria
Bath repair in and around Carleton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Cracks in an acrylic bath
- Snagging damage from a refit
About Carleton
Carleton is about 3 miles south-east of Carlisle, in Cumbria. We visit clients in Carleton and nearby villages, so there is no workshop to go to. Carleton is one of 438 places in Cumbria we cover. Our jobs stretch from Carleton to Newcastle upon Tyne (50 miles away).
All of CA4 is within our area, from the main roads to the quietest streets. If you are just outside Carleton, we cover Cumwhinton (1 mile east), Wetheral Pasture (2 miles east), Scotby (2 miles north), Wreay (2 miles south) and Wetheral (2 miles north-east). Further out, we also cover Carlisle (3 miles north-west), Penrith (15 miles south), Raffles (4 miles north-west), Morton (3 miles north-west), Wigton (11 miles west) and Belle Vue (4 miles north-west).
Local landmarks in Carleton
Typical jobs here are in homes near Petteril Bank School and St John Henry Newman Catholic School. The closest station to Carleton is Wetheral station, about 2.6 miles north-east of the centre. A little further out are Garlands Hospital (0.9 miles north) and Guildhall Museum (2.9 miles north-west).
- Local facilities include County Borough of Carlisle (2.9 miles north-west)
How we handle bath repair in Carleton
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. We work on whirlpool & spa baths, pressed steel enamel and cast iron enamel, and the jobs we see most are hairline or through cracks in acrylic and chips caused by builders.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Carleton (CA4)
- Area hub
- Cumbria
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.
Why book with us
- No extra charge for your area
- A fixed quote before booking
- Typically one visit, start to finish
- Straight answers about what a repair can do
See our prices page and bath cost comparison.
What we are called out for in Carleton
A cracked acrylic bath typically wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.
People typically call us when they notice something like this:
- A hole punched through by something heavy
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Scratches you can feel with a fingernail
Before booking anyone
- How changes to the job are handled
- How long it needs to cure
- A fixed price, and whether VAT is included
- Whether cleaning and preparation are in the price
What we do, step by step
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to two to three hours for most chips, including clearing up.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or call us. We’ll say straight away if a repair is the right fix.
Read more
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Carleton: your questions answered
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you charge for travel?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
I tried a repair kit. Can you fix it?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you redo someone else’s repair?
In most cases. The old repair comes out first, so mention it when you send photos.
What happens after I send photos?
We come back with a fixed quote, plus dates. There is no obligation to book.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Don’t leave a fresh chip for long
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- If an acrylic bath flexes, have its feet adjusted
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
When we would advise against a repair
A repair isn’t always the answer, and we would rather say so up front. We cannot fix:
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
What bath repair costs
Prices start from £95. Every quote is fixed and free. What we look at:
- How hard the colour is to match
- What the surface is made of
- How much damage there is
- The type of damage
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Quotes from your pictures
You can typically get a fixed quote without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- One sharp close-up of the damage
- What it’s made of, if you know
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Nearby places to Carleton
What else we do in Carleton
About our accreditations · Every repair comes with a one-year guarantee.
