Cornwall · England
Bath chip & crack repair in Carnkie, Cornwall
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Carnkie and across Cornwall. Free, fixed quotes from your photos.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
About our bath repair in Carnkie
Most of our bath repairs take a few hours, and you can normally bathe again the next day. There is no need to book a plumber or tiler, because nothing is disconnected. Typical jobs include impact holes in acrylic and cracks in an acrylic bath, on cast iron enamel, pressed steel enamel and whirlpool & spa baths.
All our work is covered by our one-year guarantee.
- Area
- Carnkie (TR13)
- Area hub
- Cornwall
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to a morning or an afternoon.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Tell us if there are stairs or a lift
- Open a window if you can
- Mention any parking restrictions or tricky access
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say immediately whether it can be repaired.
Related advice
Nearby places to Carnkie
Also in Carnkie
Carnkie questions
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
How we price bath repair
Repairs from £95. There’s no charge for travel to Carnkie. The price comes down to:
- The material
- How much damage there is
- Unusual colours or finishes
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
Keeping it looking good
So the finish stays in good condition for years:
- Put a towel in the bath if you’re working above it
- Check that an acrylic bath doesn’t move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
- Clean with warm water and a mild detergent
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Honest limits
We will not take on work that won’t last, so these are the limits:
- Leaking fittings, which need a plumber
- Metal that has corroded all the way through
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Why repair rather than replace?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Carnkie customers choose us
- Technicians who travel to you, UK-wide
- Fixed prices from your photos
- Same prices wherever you are
- Every repair guaranteed for a year
Take a look at our pricing or guide to resurfacing and replacement costs.
What we are called out for in Carnkie
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Send us a photo if you notice any of these:
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
- Snagging damage from a refit
What your quote should include
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
- How soon you can use it again
- How your room will be protected
Covering Carnkie
Carnkie is about 5 miles south of Redruth, in Cornwall. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 644 places across Cornwall.
Our technicians cover all of TR13. From Sunnyside, Carnkie and Roseline Estate or a nearby road, we can come to you. Nearby, we also work in Penmarth (1 mile north-west), Porkellis (1 mile south-west), Wendron (3 miles south-west), Trevenen Bal (4 miles south-west) and Troon (4 miles north-west). Within a short drive, we also cover Truro (9 miles north-east), Falmouth (6 miles east), Camborne (5 miles north-west), Redruth (5 miles north), Penzance (15 miles west) and Helston (5 miles south-west).
Landmarks near Carnkie
In Carnkie, that means homes near Halwin School and the streets around them. The nearest railway station is Penryn station, about 4 miles east. A little further out are Constantine Museum and Archive (3.4 miles south) and Carn Brea Castle (4.4 miles north-west). The countryside around Carnkie includes Carnmenellis.
About our accreditations · Every repair comes with a one-year guarantee.
