Lancashire · England
Bath chip & crack repair in Catlow, Lancashire
Damaged bath in Catlow? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Rusty patches near the plughole
- Cracks in an acrylic bath
About our bath repair in Catlow
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. We regularly repair cast iron enamel, roll-top & freestanding and pressed steel enamel, and people most frequently call us about impact holes in acrylic and scuffs and scratches in the surface.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Catlow (BB10)
- Region
- Lancashire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. The price reflects the work involved, not your postcode. You’ll see the full price before you book.
Why us?
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
Take a look at our prices page or resurfacing vs replacement cost guide.
More services for Catlow
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
Catlow questions
Do you charge for travel?
There is no separate call-out charge. Your fixed quote includes everything.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you quote from pictures?
Generally, yes. Clear photos let us give you a fixed quote without visiting.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll take it from there.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Our work in Catlow
Catlow is about 1 mile south-east of Nelson, in Lancashire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We cover all 482 towns and villages in Lancashire, from the larger towns to small villages. Our jobs stretch from Catlow to Manchester (about 24 miles away).
We cover every part of BB10. Other places close to Catlow include Southfield (1 mile north), Haggate (1 mile south-west), Cockden (1 mile south-west), Thursden (2 miles south-east) and Trawden (2 miles north-east). Within a short drive, we also cover Burnley (4 miles south-west), Accrington (9 miles south-west), Rawtenstall (10 miles south-west), Clitheroe (9 miles west), Haslingden (10 miles south-west) and Bacup (9 miles south).
Around Catlow
Locally, our jobs take us to homes close to St John's Church, Pendle Vale College and Briercliffe Primary School and the streets around them. The nearest railway station is Nelson station, about 1.6 miles north-west of the centre. A little further out are Pendle Community Hospital (1.7 miles north-west) and British In India Museum (1.3 miles north-west). Green spaces nearby include Noyna Hill and Rowley Lake.
Materials and what they mean for the repair
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so early repairs matter.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
What bath repair costs
Prices start from £95. You’ll know the full cost before booking. We take into account:
- How easy the damage is to reach
- What kind of damage it is
- The material and finish
- Doing more than one item at once
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed price
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- Something in shot to show the size
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
What we are called out for in Catlow
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until the acrylic gives way.
The most common problems we are called about are:
- A chip where the taps sit
- Chips on the rim or sides
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
Comparing quotes
- When it can be used again
- Who will actually do the work
- Whether the colour is mixed to match
- How the room is protected while they work
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
- If an acrylic bath flexes, have its feet adjusted
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
How it works
We work cleanly and quietly. Protection goes down first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
Before we arrive
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Make sure the area is dry
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
