Lancashire · England
Bath chip & crack repair in Thursden, Lancashire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Thursden. Free, fixed quotes from your pictures.
- Repairs from £95
- Scratches you can feel with a fingernail
- Hairline or through cracks in acrylic
Questions from Thursden
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Something went through my bath. Can it be fixed?
Typically, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Bath repair at your home in Thursden
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, generally in a single visit. Our technicians work on acrylic, pressed steel enamel and roll-top & freestanding, and common reasons people get in touch are a kit repair that didn’t last and snagging damage from a refit.
Whatever the size of the job, it’s backed by a one-year guarantee in Thursden and across Lancashire.
- Location
- Thursden (BB10)
- County
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- The material
- What kind of damage it is
- How many areas need work
- The colour and finish to match
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
The better the pictures, the more accurate the price. Here’s what helps:
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- One sharp close-up of the damage
- Something in shot to show the size
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
When we’d advise against a repair
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Water coming from the waste or taps rather than the bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
If in doubt, send photos and we will say what we think.
Materials we work on in Thursden
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Do you need bath repair in Thursden?
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Look out for any of the following:
- Snagging damage from a refit
- A cracked acrylic bath
- Chips along the edge of the bath
- Impact holes in acrylic
Comparing quotes
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
- What the guarantee covers, and for how long
- How the colour is matched
Repair or replace in Thursden?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why choose Surface Doctor in Thursden
- Colour mixed on the day to match
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- A fixed quote before you book
See our full price list and bath cost comparison.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Do not leave razors or cans standing in the bath
- Have new chips seen to early
- Check that an acrylic bath does not move when you stand in it
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
How it works
We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to look after it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Let us know which floor the room is on
How to get a price
If you are in Thursden and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Thursden and the surrounding area
Thursden is about 3 miles south-east of Nelson, in Lancashire. We travel to customers in Thursden and nearby villages, so nothing has to leave your home. Thursden is one of 482 towns and villages in Lancashire we cover. We work right across the region, from Thursden to Manchester (23 miles away).
We cover every part of BB10. We also cover the places around Thursden: Catlow (2 miles north-west), Cockden (2 miles west), Southfield (2 miles north-west), Haggate (2 miles west) and Trawden (2 miles north). We also work in nearby towns such as Burnley (4 miles west), Accrington (10 miles south-west), Nelson (3 miles north-west), Rawtenstall (10 miles south-west), Colne (3 miles north) and Clitheroe (11 miles west).
Near you in Thursden
For rail, the closest station is Nelson station, roughly 3.4 miles north-west. Nearby you’ll also find Burnley General Hospital (3.4 miles west) and Queen Street Mill Textile Museum (2.4 miles west). For a walk, there’s Towneley Castle Hill and Rowley Lake.
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Other services in Thursden
About our accreditations · Every repair comes with a one-year guarantee.
