Isle of Anglesey · Wales
Bath Repair in Cemaes
Damaged bath in Cemaes? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips along the edge of the bath
- Rusty patches near the plughole
Bath repair at your home in Cemaes
Most of our bath repairs take a few hours, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with rust by the waste and overflow and chips along the edge of the bath, we can help, on whirlpool & spa baths, pressed steel enamel and cast iron enamel alike.
Every repair is covered by a one-year guarantee.
- Location
- Cemaes (LL67)
- County
- Isle of Anglesey
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Isle of Anglesey and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Cemaes, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Towns and villages near Cemaes
Also in Cemaes
Our work in Cemaes
Cemaes is about 10 miles north-east of Holyhead, in Isle of Anglesey. Customers in Cemaes get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 115 towns and villages across Isle of Anglesey. You can also see our page for Liverpool, about 63 miles away.
We cover every part of the LL67 postcode area and the streets around it. Whether you live on High Street, Maes Cynfor and Victoria Road or a nearby road, a technician can come to you. We also cover the places around Cemaes: Llanbadrig (1 mile east), Cromlech (1 mile south-west), Tregele (1 mile south-west), Llanfechell (1 mile south) and Mechell (2 miles south). Within a short drive, we also cover Holyhead (10 miles south-west), Blackbridge (10 miles south-west), Porth-y-Felin (10 miles south-west), Llangefni (12 miles south-east), Stryd (11 miles south-west) and Pont-Hwfa (11 miles south-west).
Near you in Cemaes
Locally, our jobs take us to homes close to Ysgol Gynradd Cemaes, Woburn Hill Hotel and St Padrig's Church, among other places. A little further out are Cemaes Heritage Centre (less than half a mile east) and Castell Porth Wen (2.4 miles east). Not far away are Moel Llanlleiana and Trwyn yr Wylfa.
Should you replace it?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before you book.
Why book with us
- Everything repaired in place
- One-year guarantee on every repair
- Rooms protected and left tidy
- A fixed quote before booking
Read our prices page and guide to resurfacing and replacement costs.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- How many items we do on one visit
- The material and finish
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- The material, if you know it
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
Email us pictures of the damage and one of the whole item, with your LL67 postcode, and we’ll reply with a fixed quote.
How the visit works
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It normally takes a morning or an afternoon, and you can get on with other things while we are there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Move bottles, mats and clutter away from the area
- Ensure the area is dry
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Read more
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- Rust that has eaten right through a steel bath
- Cracks in acrylic we can’t reach from underneath
If in doubt, send photos and we will say what we think.
Materials we work on in Cemaes
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
How to look after the repair
Nothing complicated is needed, just a few sensible habits:
- Store metal items away from the bath
- Clean with warm water and a mild detergent
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Cemaes questions
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Do you cover Cemaes?
We do. We send a technician to Cemaes for every job, and the price is the same as everywhere else.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
About our accreditations · Every repair comes with a one-year guarantee.
