Isle of Anglesey · Wales
Bath Repair for Stryd homes
Bath repair across Stryd and nearby, typically in one visit.
- Repairs from £95
- A chipped rim or side
- Holes from dropped items
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
- Typically one visit, start to finish
- Dust sheets down, tidy finish
Read our pricing or resurfacing vs replacement cost guide.
How we handle bath repair in Stryd
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. We’re often asked to fix holes from dropped items and an old repair that has yellowed or come loose, in acrylic, roll-top & freestanding and cast iron enamel.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Stryd (LL65)
- Area hub
- Isle of Anglesey
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Places near Stryd
Other services in Stryd
Landlords, agents and businesses in Stryd
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Stryd as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Aftercare tips
Once the work has cured, treat it gently:
- Don’t leave a fresh chip for long
- Store metal items away from the bath
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
When a repair isn’t the answer
It helps to know what we cannot do too:
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Stryd questions
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
How do I get a price for bath repair in Stryd?
Repairs from £95. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo with your LL65 postcode.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Are there extra charges for Stryd?
There’s no separate call-out charge. Your fixed quote includes everything.
What happens next?
We review the pictures and send a fixed quote with dates.
Prices and what affects them
Repairs from £95. You will not pay by the hour. The price is based on:
- Whether we combine several jobs
- The type of damage
- How many areas need work
- Where the damage is and how we get to it
We don’t add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- A photo taken from further back
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
About Stryd
Stryd is about 1 mile south-west of Holyhead, in Isle of Anglesey. Jobs in Stryd are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 115 places across Isle of Anglesey, from the larger towns to small villages. You can also see our page for Liverpool, about 71 miles away.
All of LL65 is covered. From Plas Road, Gors Avenue and King's Road or anywhere nearby, we can come to you. With the A5154 close by, Stryd is simple for us to get to. Close by, we cover Holyhead (1 mile north-east), Pont-Hwfa (1 mile north-west), Blackbridge (1 mile east), Porth-y-Felin (1 mile north) and Isle of Anglesey (1 mile south-east). Larger places within reach include Llangefni (14 miles east), Amlwch (14 miles north-east), Valley (3 miles south-east), Rhosneigr (7 miles south-east), Pencraig (14 miles east) and Cemaes (11 miles north-east). Stryd is one of the larger places we cover in Isle of Anglesey.
Around Stryd
In Stryd, that means homes near Saint Mary's Church, Chester Inn and Ysgol Santes Fair. There’s a railway station in Stryd itself: Holyhead station. Further afield, we also cover the area around Stanley Sailors' Hospital (0.5 miles north-east) and Caer Gybi (0.5 miles north-east). The countryside around Stryd includes South Stack Cliffs RSPB reserve and Tre-wilmot.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which typically takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Getting ready for the visit
- Make sure the area is dry
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Get a quote
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Read more
Common problems we fix in Stryd
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Keep an eye out for these signs:
- Scuffs and scratches in the surface
- Rust spots around the plughole
- Snagging damage from a refit
- Impact holes in acrylic
What to look for in a quote
- What preparation is included
- Whether they match the colour on site
- How your room will be protected
- The length of the guarantee and what it covers
Should I try a DIY kit first?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
