Powys · Wales
Bath chip & crack repair in Ceri, Powys
Bath repair across Ceri and nearby, typically in one visit and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Bath repair at your home in Ceri
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, the tiles aren’t touched, and the finish is matched to the rest of the bath. Typical jobs include chips under the taps and a kit repair that didn’t last, in roll-top & freestanding, cast iron enamel and acrylic.
You get a one-year guarantee, the same in Ceri as everywhere else we work.
- Location
- Ceri (SY16)
- Region
- Powys
- Warranty
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Ceri
For anyone letting property in or around Ceri, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Towns and villages near Ceri
Other services in Ceri
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Ceri
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
When to call us in Ceri
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
These are the problems we are asked about most:
- Deep scratches in acrylic
- Damage beneath the taps
- Rust by the waste and overflow
- Chips on the rim or sides
Comparing quotes
- Aftercare advice
- Whether the colour is mixed to match
- How changes to the job are handled
- How your room will be protected
Prices and what affects them
Prices start from £95. There’s no area surcharge for Ceri. What changes the price is:
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What the surface is made of
- Whether we combine several jobs
We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Most quotes are done from pictures alone. To make it quick:
- A coin beside the damage so we can judge size
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the following day, the bath is ready to use.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Avoid using the area for a few hours before we arrive
- Point us to the nearest place to park
Ask for a price
Email us photos of the damage and one of the entire item, with your SY16 postcode, and we will reply with a fixed price.
Advice
About Ceri
Ceri (Welsh: Kerry) is about 3 miles east of Y Drenewydd, in Powys. Customers in Ceri get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. We cover all 234 towns and villages across Powys. Our jobs stretch from Ceri to Birmingham (about 58 miles away).
We cover every part of the SY16 postcode area and the streets around it. You’ll find streets such as Garden Close, Dolforgan View and Fairfield, all of which we cover. We also cover the places around Ceri: Penygelli (2 miles north-west), Llanllwchaiarn (2 miles north-west), Gwestydd (3 miles north-west), Cefn Mawr (3 miles north-west) and Aber-miwl (3 miles north). Larger places within reach include Y Drenewydd (3 miles west), Y Trallwng (12 miles north-east), Llanidloes (12 miles west), Penygloddfa (3 miles north-west), Knighton (14 miles south-east) and Pen-y-Glodfa (3 miles north-west).
Around Ceri
Locally, our jobs take us to homes close to The Herbert Arms, St. Michael's C.I.W. School and Church Of St Michael And All Angels. The nearest railway station is Newtown (Powys) station, about 2.4 miles west. A little further out are Robert Owen Museum (2.6 miles north-west) and Ceri Castle (less than half a mile south). Not far away are Weston.
FAQs for Ceri
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Are there extra charges for Ceri?
Travel is included in the price, and we charge the same wherever you are.
Do you cover the entire of Powys?
Across the UK, and that includes Ceri. Prices don’t change with location.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Keeping it looking good
How the surface is treated afterwards matters:
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
About our accreditations · Every repair comes with a one-year guarantee.
