Warwickshire · England

Bath Repair for Chelmsley Wood homes

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Chelmsley Wood. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Deep scratches in acrylic
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Chelmsley Wood

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Bath repair in Chelmsley Wood, done in place

You do not need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Common call-outs are for a kit repair that didn’t last and a hole punched through by something heavy, across pressed steel enamel, roll-top & freestanding and cast iron enamel.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Area
Chelmsley Wood (B37, B40)
Region
Warwickshire
Cover
12 months on all our work
Price
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

When we would advise against a repair

Some jobs are not right for a repair, for example:

  • Leaking fittings, which need a plumber
  • Rust that has eaten right through a steel bath
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we will say what we think before booking.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic

What bath repair costs

Prices start from £95. There’s no area surcharge for Chelmsley Wood. The price reflects:

  • Unusual colours or finishes
  • How much damage there is
  • Access to the area
  • What the surface is made of

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

Quotes from your pictures

The better the photos, the more accurate the price. Here’s what helps:

  • Natural light rather than flash
  • One sharp close-up of the damage
  • Details of any past repairs
  • A coin beside the damage so we can judge size

Email us a photo of the damage and a wider shot of the whole item, with your B37 postcode, and we will reply with a fixed quote.

Landlord and trade work in Chelmsley Wood

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

When to call us in Chelmsley Wood

Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal lets water in, and rust follows.

The things customers usually mention when they call include:

  • A hole punched through by something heavy
  • Deep scratches in acrylic
  • Rust by the waste and overflow
  • Chips under the taps

Before booking anyone

  • Whether cleaning and preparation are in the price
  • Whether they match the colour on site
  • Whether there are any call-out or travel charges
  • Whether the price is fixed and includes VAT

Choosing a repair company

Chelmsley Wood and nearby

Chelmsley Wood is about 5 miles north-east of Solihull, in Warwickshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in 324 places across Warwickshire. We work right across the region, from Chelmsley Wood to Birmingham (7 miles away).

Our visits in B37 and B40 work the same way as everywhere else we cover. From Box Road, Dunster Road and Poplar Avenue or anywhere nearby, we can come to you. We also travel to Marston Green (1 mile south-west), Fordbridge (1 mile north-west), Kingshurst (1 mile north-west), Tile Cross (1 mile west) and Kitts Green (2 miles west). Within a short drive, we also cover Nuneaton (11 miles east), Warwick (15 miles south-east), Royal Leamington Spa (15 miles south-east), Bedworth (10 miles east), Leamington Spa (15 miles south-east) and Kenilworth (11 miles south-east).

Local landmarks in Chelmsley Wood

We visit homes around WMG Academy for Young Engineers (Solihull), Meriden Park and St Andrew's and the streets around them. Nearby too are Bishop Wilson Church of England Primary School (within half a mile north) and The Coleshill School (1.2 miles north-east). For rail, the closest station is Marston Green station, roughly 1.3 miles south-west of the centre. Well-known places in the area include Brooklands Hospital (0.7 miles south-west) and Coleshill (1.2 miles north). For a walk, there is Yorks Wood and Shard End Lake.

Map of Chelmsley Wood © OpenStreetMap contributors

How the visit works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which generally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.

  1. First, we check the damage against your photos and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Let us know which floor the room is on
  • Avoid using the area for a few hours before we arrive

Ask for a price

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Related advice

Chelmsley Wood: your questions answered

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Do you come to Chelmsley Wood?

Yes, we do. Technicians travel to Chelmsley Wood from across the region, and the price is the same as everywhere else.

Is there a call-out fee?

There is no separate call-out charge. The fixed quote covers the visit and the work.

Is there a guarantee?

Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.

Is there any odour?

Some materials have a smell while they’re applied. It clears as the materials cure.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one, so let us know about it.

Repair or replace: which is better?

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why Chelmsley Wood clients choose us

  • Rooms protected and left tidy
  • Everything repaired in place
  • CHAS and Constructionline accredited
  • One price list for the whole UK

Take a look at our full price list and guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.