Warwickshire · England
Bath Repair for Kingshurst homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Kingshurst, with a one-year guarantee on every repair.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that is discoloured or lifting
When to call us in Kingshurst
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
People normally call us after spotting one of these:
- Chips caused by builders
- A kit repair that didn’t last
- Holes from dropped items
- Cracks in an acrylic bath
What your quote should include
- Who will actually do the work
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- How to look after the finish
About our bath repair in Kingshurst
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We work on roll-top & freestanding, acrylic and pressed steel enamel, and the jobs we see most are a chipped rim or side and scratches you can feel with a fingernail.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Kingshurst (B37, B36, B33)
- Region
- Warwickshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
We will not take on work that will not last, so these are the limits:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
For landlords and businesses
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
How the visit works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours, depending on the damage from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Point us to the nearest place to park
- Let us know about parking or access
- Tell us if there are stairs or a lift
How to get a price
Email us a photo of the damage and one of the whole item, with your B37 postcode, and we will come back with a fixed quote.
Read more
Nearby places to Kingshurst
What else we do in Kingshurst
Repairing versus replacing in Kingshurst
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- Colours mixed by hand to suit your surface
- Repair technicians who travel to you, UK-wide
- One price list for the whole UK
- We leave the room as we found it
Read our full price list and bath cost comparison.
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Have new chips seen to early
- Do not scrub with anything abrasive
- Check that an acrylic bath does not move when you stand in it
- Use a soft cloth and washing-up liquid for everyday cleaning
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
Questions from Kingshurst
When can I have a bath again?
Normally by the following day, depending on the repair.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Covering Kingshurst
Kingshurst is about 1 mile north of Fordbridge, in Warwickshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover 324 places across Warwickshire, from the larger towns to small villages. We work right across the region, from Kingshurst to Birmingham (about 6 miles away).
Our visits in B37, B36 and B33 work the same way as everywhere else we cover. We regularly work on streets such as Cooks Lane, Conway Road and Moxhull Road and the roads around them. If you are just outside Kingshurst, we cover Fordbridge (1 mile south), Tile Cross (1 mile south-west), Chelmsley Wood (1 mile south-east), Shard End (1 mile north-west) and Kitts Green (1 mile south-west). Further out, we also cover Nuneaton (12 miles east), Bedworth (11 miles east), Kenilworth (12 miles south-east), Atherstone (11 miles north-east), Castle Vale (3 miles north-west) and Chilvers Coton (12 miles east).
What’s near Kingshurst
Around Kingshurst, we work in homes near Centre for Accelerated Learning, St Barnabas' Church and St Anthony's Catholic Primary School and the streets around them. You’ll also find Meriden Park (0.6 miles south-east), The White Hart Public House (0.7 miles south-west) and Tudor Grange Academy Kingshurst (within half a mile south). The closest station to Kingshurst is Marston Green station, about 1.5 miles south of the centre. Further afield, we also cover the area around Stechford and Yardley North (2.6 miles west) and Castle Vale Shopping Centre (2.9 miles north-west). Green spaces nearby include Shard End Lake and Yorks Wood.
How we price bath repair
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- The material
- Doing more than one item at once
- How much damage there is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Something in shot to show the size
- Any earlier repairs or coatings
To get a price, send two or three photos through our quote form or ring us. We’ll say straight away if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
