Lancashire · England
Bath chip & crack repair in Chipping, Lancashire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Chipping and across Lancashire. Free, fixed quotes from your pictures.
- Repairs from £95
- A chip where the taps sit
- Chips on the rim or sides
Bath repair in Chipping without replacing anything
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. We’re often asked to fix damage done while the bathroom was being fitted and a hole punched through by something heavy, on pressed steel enamel, cast iron enamel and acrylic.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Chipping (PR3)
- County
- Lancashire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Chipping
Chipping is about 4 miles north of Longridge, in Lancashire. Customers in Chipping get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Chipping is one of 482 places in Lancashire where we work. We work right across the region, from Chipping to Manchester (about 32 miles away).
All of PR3 is within our area, from the main roads to the quietest streets. Local streets include Kirklands, Kirkfield and Church Raike, and we cover them all. We also travel to Hesketh Lane (1 mile south), Knowle Green (3 miles south), Ward Green Cross (4 miles south), Hothersall (4 miles south) and Stydd (5 miles south-east). Within a short drive, we also cover Preston (9 miles south-west), Burnley (15 miles south-east), Lancaster (14 miles north-west), Bamber Bridge (11 miles south), Accrington (13 miles south-east) and Leyland (14 miles south).
Around Chipping
Our clients here include homes close to The Sun Inn, St Mary's Roman Catholic Primary School and Chipping Congregational Church, among other places. Not far away are Beacon Fell.
DIY repairs versus a professional job
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, normally by the next day, the bath is ready to use.
Before we arrive
- Open a window if you can
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
Signs you need bath repair in Chipping
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Cracks in an acrylic bath
- Rust spots around the plughole
- Damage beneath the taps
- Deep scratches in acrylic
Questions to ask before you book
- When it can be used again
- Whether they match the colour on site
- What the guarantee covers, and for how long
- Whether a trained technician does the job
Chipping questions
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
What happens once I’ve sent pictures?
You get a fixed quote and available dates. If we need another angle, we will ask.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Do you cover Chipping?
Yes. We work across the UK and travel to Chipping. Send photos and we’ll quote, or call 0345 017 0787.
Can you repair something that’s been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Are there extra charges for Chipping?
There is no separate call-out charge. The fixed quote covers the visit and the work.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why Chipping clients choose us
- No need to remove anything
- Work done at your home or business
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
Read our pricing or bath cost comparison.
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Wear across the whole surface, which needs re-enamelling
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Rinse it down after each bath
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Cover the bath during DIY or decorating
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- What the surface is made of
- Previous DIY repairs that have to come out
- How many areas need work
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
Good photos mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Towns and villages near Chipping
Other services in Chipping
About our accreditations · Every repair comes with a one-year guarantee.
