Rhondda Cynon Taff · Wales
Bath chip & crack repair in Church Village, Rhondda Cynon Taff
Problem with your bath in Church Village? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
Bath repair at your home in Church Village
Whatever the damage, the aim is the same: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on acrylic, roll-top & freestanding and pressed steel enamel, and the jobs we see most are cracks in an acrylic bath and rust spots around the plughole.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Where
- Church Village (CF38)
- Region
- Rhondda Cynon Taff
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Church Village
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a call-out fee?
There is no separate call-out charge. Your fixed quote includes everything.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Will I be able to see the repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Is a holed acrylic bath repairable?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Towns and villages near Church Village
What else we do in Church Village
Signs you need bath repair in Church Village
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Damage beneath the taps
- A cracked acrylic bath
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
Comparing quotes
- How your room will be protected
- Whether a trained technician does the job
- What prep work is covered
- Whether the price covers travel
What affects the price in Church Village
Repairs from £95. We don’t charge extra for travel to Church Village. The price depends on:
- How many areas need work
- The material
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
How to get a fixed price
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- The material, if you know it
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.
Repair or replace: which is better?
Swapping a damaged bath for a new one usually means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- Colours mixed by hand to suit your surface
- One price list for the whole UK
- Everything repaired in place
- We leave the room as we found it
Take a look at our prices page or bath cost comparison.
Where we work around Church Village
Church Village is about 2 miles south of Pontypridd, in Rhondda Cynon Taff. Jobs in Church Village are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Church Village is one of 133 places in Rhondda Cynon Taff we cover.
Our technicians cover all of CF38. We regularly work on streets such as Church Road, Station Road and Birch Grove. Neighbouring places we cover include Upper Church Village (1 mile north-west), Tonteg (1 mile east), Efail Isaf (1 mile south), Hawthorn (1 mile north-east) and Llantwit Fardre (1 mile south-west). Further out, we also cover Aberdare (12 miles north-west), Mountain Ash (8 miles north), Tonypandy (6 miles north-west), Rhondda (9 miles north-west), Porth (5 miles north-west) and Mountain Ash East (8 miles north). As one of the bigger places in Rhondda Cynon Taff, Church Village sees plenty of our work.
Around Church Village
Around Church Village, we work in homes near Village Arms, Church of St Illtyd and Llanilltud Faerdref Primary and the streets around them. Nearby too are Ysgol Gyfun Garth Olwg (within half a mile south-west) and Hawthorn High School (1 mile north-east). The closest station to Church Village is Trefforest Estate station, roughly 1.2 miles east. Nearby you will also find University of South Wales Art Collection Museum (1.5 miles north) and Dewi Sant Hospital (2.4 miles north-west). Open spaces near Church Village include Glamorgan Canal / Long Wood and Garth Hill.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Get any new chip repaired before it rusts
- Fix dripping taps early to stop staining and limescale
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
- Have a window or extractor fan available
How to get a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away whether it can be repaired.
Advice
For landlords and businesses
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
Landlords, letting agents and housing providers in Church Village use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
