Hampshire · England
Bath Repair in Chute Forest
Damaged bath in Chute Forest? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A cracked acrylic bath
- Chips along the edge of the bath
How we handle bath repair in Chute Forest
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day. If you’re dealing with holes from dropped items and snagging damage from a refit, we can generally put it right, on whirlpool & spa baths, acrylic and roll-top & freestanding alike.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Chute Forest (SP11)
- Region
- Hampshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Chute Forest
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Do you work in Chute Forest?
Yes. We cover the whole UK and come to Chute Forest and the rest of Hampshire. Send photos and we’ll quote, or call 0345 017 0787.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Hampshire.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Something went through my bath. Can it be fixed?
Generally. Photos of the hole and the underside help us check.
Which areas do you work in?
We work UK-wide, so Chute Forest is covered. Our prices are the same everywhere.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Access to the area
- How hard the colour is to match
- How much damage there is
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Before you send photos, these tips help us give you a firm price:
- A coin beside the damage so we can judge size
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Where we work around Chute Forest
Chute Forest is about 5 miles north-west of Andover, in Hampshire. Wherever you are in the SP11 postcode area, we come to you. We work in all 683 towns and villages in Hampshire. Our nearest city page is London, about 65 miles away.
We work across the SP11 postcode area and the streets around it. Other places close to Chute Forest include Tangley (1 mile north-east), Clanville (1 mile south-east), Upper Chute (2 miles north-west), Redenham (2 miles south) and Appleshaw (2 miles south). We also work in nearby towns such as Andover (5 miles south-east), Tidworth (5 miles west), Ludgershall (3 miles west), Whitchurch (10 miles east), East Anton (5 miles south-east) and Overton (13 miles east).
What’s near Chute Forest
In Chute Forest, that means homes near St Mary's Church and Hatchet Inn and the streets around them. For rail, the closest station is Andover station, roughly 4.6 miles south-east. Well-known places in the area include Andover War Memorial Hospital (4.3 miles south-east) and Ludgershall Castle (2.9 miles west). Not far away are Anton Lakes.
Repair or replace in Chute Forest?
Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- One visit for most repairs
- Free fixed quotes from pictures
- No need to remove anything
- A year’s guarantee on all work
See our full price list and resurfacing vs replacement cost guide.
Nearby places to Chute Forest
More services for Chute Forest
When to call us in Chute Forest
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Common reasons people in Chute Forest contact us include:
- Scratches you can feel with a fingernail
- A hole punched through by something heavy
- An old repair that has yellowed or come loose
- Damage beneath the taps
Questions to ask before you book
- Whether cleaning and preparation are in the price
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. The job generally runs to a morning or an afternoon.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Clear the area around the damage
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What a repair cannot fix
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we will say what we think.
Materials we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Store metal items away from the bath
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
