Hampshire · England
Bath Repair for Faberstown homes
Problem with your bath in Faberstown? We put it right where it is, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
About our bath repair in Faberstown
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Typical jobs include a failed DIY repair that’s discoloured or lifting and scuffs and scratches in the surface, in cast iron enamel, acrylic and roll-top & freestanding.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Faberstown (SP11)
- Area hub
- Hampshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
- Put a towel in the bath if you’re working above it
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
FAQs for Faberstown
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Do you charge for travel?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
What happens after I send pictures?
We come back with a fixed price. You are under no obligation.
Do you cover the entire of Hampshire?
Across the UK, and that includes Faberstown. Our prices are the same everywhere.
Do you work in Faberstown?
Yes. We work across the UK and come to Faberstown and the rest of Hampshire. Send pictures and we’ll quote, or call 0345 017 0787.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. You can expect it to take two to three hours for most chips, and we’ll keep you posted as we go.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
How to get a price
If you are in Faberstown and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
What we cannot put right
A few problems are outside what a surface repair can do:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Leaking fittings, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we work on in Faberstown
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Our work in Faberstown
Faberstown is about 5 miles north-west of Andover, in Hampshire. From the centre of Faberstown to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 683 places across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 67 miles away.
Here we cover the SP11 postcode area. You will find streets such as Andover Road and Shoddesden Lane, and we cover them all. Neighbouring places we cover include Redenham (1 mile east), Appleshaw (1 mile east), Fyfield (2 miles south), Chute Forest (2 miles north-east) and Clanville (2 miles east). Further out, we also cover Andover (5 miles south-east), Tidworth (3 miles west), Whitchurch (11 miles east), East Anton (6 miles east), Overton (14 miles east) and Picket Piece (7 miles east).
What’s near Faberstown
Around Faberstown, we work in homes near Church of St Peter in the Wood, among other places. Faberstown’s nearest station is Andover station, roughly 4.7 miles south-east of the centre. Nearby you’ll also find Andover War Memorial Hospital (4.5 miles south-east) and Ludgershall Castle (1.8 miles north-west). Green spaces nearby include Quarley Hill and Anton Lakes.
How we price bath repair
Prices start from £95. We don’t charge extra for travel to Faberstown. The price depends on:
- The colour and finish to match
- How much damage there is
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- A picture taken from further back
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. A repair fixes just the damaged area in one visit. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Faberstown customers choose us
- Fixed prices from your pictures
- Same prices wherever you are
- A year’s guarantee on all work
- Most jobs done in one visit
See our full price list or resurfacing vs replacement cost guide.
More services for Faberstown
Landlords, agents and businesses in Faberstown
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What we’re called out for in Faberstown
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. We repair snagging damage like this regularly.
People typically call us after spotting something like this:
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
- A chipped rim or side
- Damage beneath the taps
What to look for in a quote
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
- Aftercare advice
- Who will actually do the work
About our accreditations · Every repair comes with a one-year guarantee.
