Hampshire · England
Bath Repair in Redenham
Our repair technicians come to Redenham for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust by the waste and overflow
- Chips under the taps
Should you replace it?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- We come to you, anywhere in the UK
- No extra charge for your area
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Take a look at our full price list or guide to resurfacing and replacement costs.
Bath repair in Redenham without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. Common call-outs are for deep scratches in acrylic and a chip where the taps sit, across acrylic, roll-top & freestanding and pressed steel enamel.
All our work is covered by our one-year guarantee, wherever you are in Hampshire.
- Location
- Redenham (SP11)
- Region
- Hampshire
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Wear across the entire surface, which needs re-enamelling
- Leaking fittings, which need a plumber
- A steel bath rusted through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Where we work around Redenham
Redenham is about 4 miles north-west of Andover, in Hampshire. Wherever you are in the SP11 postcode area, a technician comes to you. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages. Our nearest city page is London, about 66 miles away.
All of SP11 is covered, from the main roads to the quietest streets. Nearby, we also work in Appleshaw (1 mile south-east), Faberstown (1 mile west), Clanville (1 mile east), Chute Forest (2 miles north) and Fyfield (2 miles south). Further out, we also cover Andover (4 miles south-east), Tidworth (4 miles west), Whitchurch (10 miles east), East Anton (5 miles east), Harestock (15 miles south-east) and Overton (13 miles east).
Landmarks near Redenham
Typical jobs here are in homes near Appleshaw St Peter's CofE Primary School, Walnut Tree Inn and Church of St Peter in the Wood. Redenham’s nearest station is Andover station, roughly 4 miles south-east. Other landmarks nearby include Ludgershall Castle (2.6 miles north-west) and Andover War Memorial Hospital (3.8 miles south-east). For a walk, there’s Quarley Hill and Anton Lakes.
Towns and villages near Redenham
Also in Redenham
Do you need bath repair in Redenham?
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we’re called about are:
- Deep scratches in acrylic
- Chips under the taps
- A chipped rim or side
- Chips caused by builders
What your quote should include
- How the colour is matched
- What the guarantee covers, and for how long
- How soon you can use it again
- Whether a trained technician does the job
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
How we price bath repair
Prices start from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- How many areas need work
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- One picture of the entire bath
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Details of any past repairs
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Read more
Keeping it looking good
Simple care helps the repair last. We recommend:
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
- Make sure an acrylic bath is firm underfoot
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Questions from Redenham
Do you cover Redenham?
Yes. We work across the UK and come to Redenham. Send us photos for a fixed quote, or call 0345 017 0787.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can you repair something that is been repaired before?
Generally, yes. The old repair comes out first, so mention it when you send pictures.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
Is a holed acrylic bath repairable?
Often, if there’s access underneath. We back the hole, fill it and refinish the surface.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
