Bath and North East Somerset · England
Bath Repair in Claverton
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Claverton, with a one-year guarantee on every repair.
- Repairs from £95
- Chips along the edge of the bath
- A hole punched through by something heavy
Signs you need bath repair in Claverton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
You may need us if you’ve spotted:
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
- Chips under the taps
What your quote should include
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
- How your room will be protected
- What aftercare is recommended
How we handle bath repair in Claverton
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. Whether it’s chips under the taps and damage done while the bathroom was being fitted, we can help, on acrylic, cast iron enamel and pressed steel enamel alike.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Location
- Claverton (BA2)
- Area hub
- Bath and North East Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Keep children and pets away from the room on the day
Get a quote
To get a price, send a couple of pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
How to look after the repair
After the repair has cured, a few habits help it last:
- Put a towel in the bath if you are working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
- Get any new chip repaired before it rusts
- Store metal items away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Questions from Claverton
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can you quote from photos?
Normally, yes. Clear photos let us give you a fixed quote without visiting.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is a holed acrylic bath repairable?
Frequently, if there is access underneath. We back the hole, fill it and refinish the surface.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
For landlords and businesses
We work for landlords, letting agents and housing providers in Claverton as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Claverton. The price reflects:
- The material
- Unusual colours or finishes
- How many areas need work
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
A couple of clear pictures is all it takes. It helps if you send:
- Something in shot to show the size
- Natural light rather than flash
- A clear, close picture of the problem area
- One picture of the whole bath
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Repairing versus replacing in Claverton
Replacing a bath rarely stops at the bath: tiles along the rim generally crack when it comes out, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Claverton clients choose us
- Everything repaired in place
- Work done at your home or business
- Colours mixed by hand to suit your surface
- Accredited with CHAS, Constructionline and SafeContractor
Read our full price list or bath cost comparison.
What we cannot put right
A repair isn’t always the answer, and we’ll tell you before we start. Repairs will not solve:
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Claverton and nearby
Claverton is about 3 miles east of Bath, in Bath and North East Somerset. Across the BA2 area, we come to you. Our technicians cover all 136 towns and villages across Bath and North East Somerset. Our jobs stretch from Claverton to Birmingham (78 miles away).
Here we cover the BA2 postcode area. Other places close to Claverton include Claverton Down (1 mile west), Conkwell (1 mile south), Bathampton (1 mile north-west), Monkton Combe (2 miles south-west) and Combe Down (2 miles south-west). Larger places within reach include Bath (3 miles west), Keynsham (9 miles west), Walcot (3 miles north-west), Westmoreland (3 miles west), Kingsmead (3 miles west) and Bear Flat (3 miles west).
Around Claverton
In Claverton, that means homes near Ralph Allen School and Church of St Mary, among other places. The nearest railway station is Bath Spa station, about 2.3 miles west of the centre. Other landmarks nearby include SouthGate (2.4 miles west) and American Museum and Gardens (less than half a mile west).
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Also near Claverton
Also in Claverton
About our accreditations · Every repair comes with a one-year guarantee.
