Bath and North East Somerset · England
Bath Repair in Bathampton
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bathampton, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- Impact holes in acrylic
Landlord and trade work in Bathampton
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Bath repair in Bathampton without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for chips along the edge of the bath and impact holes in acrylic, across pressed steel enamel, whirlpool & spa baths and acrylic.
We stand behind the work with a one-year guarantee.
- Where
- Bathampton (BA2)
- County
- Bath and North East Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Do not leave a fresh chip for long
- Cover the bath during DIY or decorating
- Don’t scrub with anything abrasive
- Rinse it down after each bath
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What we cannot put right
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Wear across the entire surface, which needs re-enamelling
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Bathampton: your questions answered
Is there any odour?
Some materials have a smell while they’re applied. It clears as the materials cure.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you come to Bathampton?
Yes. We cover the entire UK and travel to Bathampton and the rest of Bath and North East Somerset. Send pictures and we’ll quote, or call 0345 017 0787.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
What we are called out for in Bathampton
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
Most people get in touch when they notice one of these:
- Deep scratches in acrylic
- Snagging damage from a refit
- Holes from dropped items
- A chip where the taps sit
Before booking anyone
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- What happens if they find more damage
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take two to three hours for most chips, including clearing up.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Keep a parking space free if you can
Ask for a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Advice
How we price bath repair
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- The size and number of damaged areas
- What the surface is made of
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed price
A couple of clear pictures is all it takes. It helps if you send:
- A clear, close picture of the problem area
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- Any details about the material
For a price in Bathampton, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Other services in Bathampton
Our work in Bathampton
Bathampton is about 2 miles north-east of Bath, in Bath and North East Somerset. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Bathampton is one of 136 towns and villages in Bath and North East Somerset we cover. We work right across the region, from Bathampton to Birmingham (77 miles away).
We cover every part of the BA2 postcode area. That includes homes on High Street, Holcombe Lane and Holcombe Vale and the roads around them. Neighbouring places we cover include Larkhall (1 mile west), Claverton Down (1 mile south), Bathwick (1 mile west), Walcot (1 mile west) and Claverton (1 mile south-east). Larger places within reach include Keynsham (8 miles west), Westmoreland (3 miles west), Lower Weston (3 miles west), Locksbrook (3 miles west), Twerton (3 miles west) and Paulton (10 miles south-west).
Around Bathampton
Locally, our jobs take us to homes close to Church of St Nicholas, Bath Royal Literary and Scientific Institution and St Mark's CofE School and the streets around them. Other local landmarks include St Mark's CofE School (1.3 miles west), The George Inn Public House (less than half a mile north), Alice Park (0.8 miles north-west) and Bathampton Primary School (less than half a mile north). The nearest railway station is Bath Spa station, about 1.8 miles south-west. Nearby you’ll also find Royal National Hospital for Rheumatic Diseases (2.9 miles west) and Midford Castle (3.1 miles south).
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
