Bath and North East Somerset · England

Bath Repair in Claverton Down

Local bath repair for Claverton Down: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Deep scratches in acrylic
  • Chips on the rim or sides
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Claverton Down?

Honest limits

Not everything can be repaired, and we’d rather say so up front. We cannot fix:

  • Wear across the entire surface, which needs re-enamelling
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Water coming from the waste or taps rather than the bath

Send us photos and we will tell you honestly.

What we work on

  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel
  • Roll-top & freestanding

Bath repair in Claverton Down, done in place

Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. If you’re dealing with a chip where the taps sit and a kit repair that didn’t last, we can help, whatever the material.

All our work is covered by our one-year guarantee, wherever you are in Bath and North East Somerset.

Location
Claverton Down (BA2)
Area hub
Bath and North East Somerset
Guarantee
One year on every repair
Price
From £95. Free and fixed, from your photos
Call
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Covering Claverton Down

Claverton Down is about 2 miles south-east of Bathwick, in Bath and North East Somerset. Whether you are in the middle of Claverton Down or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We work in all 136 towns and villages across Bath and North East Somerset. Our jobs stretch from Claverton Down to Birmingham (78 miles away).

All of BA2 is covered. We regularly work on streets such as The Avenue, Quarry Road and Beech Avenue and the roads around them. Nearby, we also work in Claverton (1 mile east), Monkton Combe (1 mile south), Widcombe (1 mile west), Combe Down (1 mile south-west) and Bathampton (1 mile north). Larger places within reach include Keynsham (8 miles west), Westmoreland (3 miles west), Lower Weston (3 miles west), Locksbrook (3 miles west), Twerton (3 miles west) and Paulton (9 miles south-west).

Around Claverton Down

In Claverton Down, that means homes near Sydney Gardens, Bath Royal Literary and Scientific Institution and Church of St Mary, among other places. Also close by are Monkton Combe School (1.3 miles south) and Ralph Allen School (0.8 miles south). The nearest railway station is Bath Spa station, roughly 1.4 miles west of the centre. A little further out are American Museum and Gardens (0.6 miles east) and SouthGate (1.5 miles west).

Map of Claverton Down © OpenStreetMap contributors

DIY kit or professional repair?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Claverton Down: your questions answered

I’m a tenant. Can you help?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.

How long before I can use the bath?

Typically the following day. We’ll tell you the exact curing time when we finish.

What happens after I send photos?

You’ll get a fixed quote back. There is no obligation to book.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

What affects the price in Claverton Down

Repairs from £95. We don’t charge extra for travel to Claverton Down. The price comes down to:

  • Whether we combine several jobs
  • The material
  • How easy the damage is to reach
  • Previous DIY repairs that have to come out

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

How to get a fixed price

The better the photos, the more accurate the price. Here’s what helps:

  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • Natural light rather than flash

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

Keeping it looking good

It’s all simple stuff, just a few sensible habits:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Do not scrub with anything abrasive
  • Do not leave a fresh chip for long
  • Keep metal cans and razors off the surface

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

The process

Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. It normally takes a morning or an afternoon, and we will keep you posted as we go.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Preparing for the visit

  • Keep children and pets away from the room on the day
  • Let us know if it has been repaired before
  • Mention any parking restrictions or tricky access

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

Send pictures for a quote

Related advice

Repair or replace: which is better?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.

What you get with us

  • One visit for most repairs
  • Accredited with CHAS, Constructionline and SafeContractor
  • Straight answers about what a repair can do
  • Rooms protected and left tidy

See our full price list and guide to resurfacing and replacement costs.

Do you need bath repair in Claverton Down?

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

The things clients normally mention when they call include:

  • Cracks in an acrylic bath
  • Chips on the rim or sides
  • Rusty patches near the plughole
  • An old repair that has yellowed or come loose

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • How the room is protected while they work
  • When it can be used again
  • What happens if they find more damage

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.