Derbyshire · England

Bath Repair in Clay Cross

We travel to Clay Cross for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Impact holes in acrylic
  • A failed DIY repair that’s discoloured or lifting
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Clay Cross homes

The process

Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes two to three hours for most chips, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can normally use the bath the following day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat

Get a quote

To get a price, send two or three photos using our quote form or ring us. We will say straight away whether it can be repaired.

Get a fixed quote

Related advice

Bath repair at your home in Clay Cross

We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about a kit repair that didn’t last and snagging damage from a refit.

Every repair is covered by a one-year guarantee.

Location
Clay Cross (S45)
Region
Derbyshire
Warranty
12 months on all our work
Quotes
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

How to look after the repair

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Clean with warm water and a mild detergent
  • Protect the bath with a towel when doing jobs nearby
  • A dripping tap stains enamel, so fix it early

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

FAQs for Clay Cross

How soon can you come?

It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.

What areas do you cover?

The entire UK, including all of Derbyshire. Just include your postcode and we’ll confirm dates.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

Does someone need to be in?

Yes. The technician needs access to the room for the visit, at a time that suits you.

Are there extra charges for Clay Cross?

We don’t add a call-out fee. The fixed price covers the visit and the work.

How long does the repair take to cure?

Most baths can be used the following day. We confirm the time before we leave.

Will the price change on the day?

The price is fixed for what the photos show. Anything extra is discussed before we begin.

I rent my home. Can I book you?

We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.

Clay Cross and the surrounding area

Clay Cross is about 5 miles south of Chesterfield, in Derbyshire. From the centre of Clay Cross to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Clay Cross is one of 532 places in Derbyshire where we work. We work right across the region, from Clay Cross to Manchester (about 40 miles away).

Here we cover the S45 postcode area. Streets in the area include Market Street, High Street and Stollard Street, all of which we cover. Being close to the A61 and A6175, Clay Cross is easy for our technicians to reach. If you’re just outside Clay Cross, we cover Danesmoor (1 mile south-east), Old Tupton (1 mile north-west), Stretton (1 mile south), Tupton (1 mile north) and Handley (2 miles south-west). Further out, we also cover Chesterfield (5 miles north), Ilkeston (14 miles south), Belper (10 miles south), Heanor (11 miles south), Dronfield (10 miles north) and Ripley (8 miles south).

Landmarks near Clay Cross

In Clay Cross, that means homes near St Barnabas Centre, Tupton Hall School and Sharley Park Community Primary School, among other places. Also close by are Royal Volunteer pub (under half a mile south-west) and Tupton Hall School (1 mile north). The nearest railway station is Chesterfield station, roughly 4.9 miles north. Other landmarks nearby include Clay Cross Urban District (within half a mile south-west) and Stainsby Mill (3.7 miles east).

Map of Clay Cross © OpenStreetMap contributors

Why repair rather than replace?

Replacing a fitted bath usually means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

What you get with us

  • CHAS and Constructionline accredited
  • One visit for most repairs
  • We’ll tell you if it’s not worth repairing
  • We come to you, anywhere in the UK

Read our full price list and resurfacing vs replacement cost guide.

Different materials, different repairs

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.

Landlords, agents and businesses in Clay Cross

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.

What we are called out for in Clay Cross

Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.

It’s worth getting a quote if you see:

  • Scuffs and scratches in the surface
  • Holes from dropped items
  • Chips on the rim or sides
  • A cracked acrylic bath

Comparing quotes

  • What aftercare is recommended
  • What the guarantee covers, and for how long
  • What happens if they find more damage
  • A fixed price, and whether VAT is included

How to compare quotes

Prices and what affects them

Repairs from £95. You won’t pay by the hour. The price is based on:

  • How much damage there is
  • How easy the damage is to reach
  • Whether old repairs or coatings need taking off
  • The material and finish

A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Quotes from your pictures

You can normally get a fixed price without us visiting. To help us price it:

  • A close-up of the damage, in focus
  • Something in shot to show the size
  • Daylight if possible, and no flash reflection
  • A picture taken from further back

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Honest limits

Not everything can be repaired, and we would rather say so up front. Repairs will not solve:

  • Water coming from the waste or taps rather than the bath
  • A bath that moves underfoot, until its support is fixed
  • A bath worn all over, where resurfacing makes more sense

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.