Aberdeenshire · Scotland
Bath Repair in Clerkhill
Bath repair for Clerkhill, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Bath repair in Clerkhill without replacing anything
A typical bath repair is a few hours’ work, and you can generally bathe again the next day. You will not need a plumber or tiler, because nothing is disconnected. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and common reasons people contact us are a cracked acrylic bath and chips on the rim or sides.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Clerkhill (AB42)
- Region
- Aberdeenshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send photos and we’ll say what we think.
What we work on
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
For landlords and businesses
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Common questions in Clerkhill
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Which areas do you work in?
All of Aberdeenshire, and the rest of the UK. Travel is included in the price.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
How long does the repair take to cure?
Typically within a day, depending on the repair.
When to call us in Clerkhill
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
The most common problems we are called about are:
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
- Damage beneath the taps
- Rust spots around the plughole
Questions to ask before booking
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
Clerkhill and nearby
Clerkhill is about 1 mile south of Peterhead, in Aberdeenshire. Anywhere in AB42, a technician comes to you. Our technicians cover all 161 towns and villages across Aberdeenshire, from the larger towns to small villages.
Every address in AB42 is covered, from the main roads to the quietest streets. Local streets include West Road, Dales Road and South Road, and we cover them all. Clerkhill sits on or near the A950 and A982, so getting to you is simple. If you’re just outside Clerkhill, we cover Peterhead (1 mile north), Buchanhaven (1 mile north), Port Henry (1 mile north-east), Roanheads (1 mile north-east) and Inverugie (2 miles north-west). Within a short drive, we also cover Fraserburgh (15 miles north-west), Ellon (14 miles south-west), Mintlaw (8 miles west), Cruden Bay (6 miles south), Inverallochy (13 miles north-west) and Longside (5 miles west).
Landmarks near Clerkhill
In Clerkhill, that means homes near The Cross Keys pub and Peterhead and the streets around them. Further afield, we also cover the area around Keith Inch Castle (1 mile east) and HM Prison Peterhead (0.9 miles south-east). Not far away are Meet Hill.
Places near Clerkhill
Also in Clerkhill
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim typically crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
What you get with us
- Fixed prices from your photos
- Colour-matched on site
- One price list for the entire UK
- We leave the room as we found it
Take a look at our pricing or bath cost comparison.
Aftercare tips
Looking after the surface is easy:
- Keep metal cans and razors off the surface
- Get a dripping tap fixed promptly
- Stick to mild cleaners and a soft cloth
- If an acrylic bath flexes, have its feet adjusted
There is nothing special to do after a repair. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a few hours for most jobs. We leave the room clean and ready to use once it has cured.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Before we arrive
- Let us know if it has been repaired before
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Getting a price
For a price in Clerkhill, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
