Aberdeenshire · Scotland
Bath Repair for Port Henry homes
Problem with your bath in Port Henry? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Chips caused by builders
- Rust by the waste and overflow
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
About our bath repair in Port Henry
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There is no need to book a plumber or tiler, because the bath does not move. Whether it’s impact holes in acrylic and chips under the taps, we can help.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Where
- Port Henry (AB42)
- County
- Aberdeenshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Port Henry
We work for landlords, letting agents and housing providers in Port Henry as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For anyone letting property in or around Port Henry, we will quote for several properties at once. Just send pictures for each address and we will price them together.
Also in Port Henry
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Prices and what affects them
Repairs from £95. We don’t charge extra for travel to Port Henry. The price depends on:
- The material and finish
- How hard the colour is to match
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send photos for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- Details of any past repairs
- What it’s made of, if you know
- The postcode, so we can plan the visit
- One picture of the entire bath
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
How it works
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Let us know about parking or access
- Let us know if it has been repaired before
- Keep children and pets away from the room on the day
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Related advice
Port Henry questions
Will there be a smell?
Expect a mild smell while we’re working.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
What areas do you cover?
Everywhere in the UK, Port Henry included. Travel is included in the price.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What we are called out for in Port Henry
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
If you can see any of these, send us a picture:
- Impact holes in acrylic
- Rust by the waste and overflow
- Chips caused by builders
- A chip where the taps sit
Before booking anyone
- What protection goes down before work starts
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- When it can be used again
Where we work around Port Henry
Port Henry is about 1 mile east of Peterhead, in Aberdeenshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 161 towns and villages across Aberdeenshire.
Every address in AB42 is within our area. That includes homes on Pool Lane, Love Lane and Park Lane and the roads around them. We also travel to Roanheads (1 mile north-west), Peterhead (1 mile west), Clerkhill (1 mile south-west), Buchanhaven (1 mile north-west) and Inverugie (2 miles west). Within a short drive, we also cover Fraserburgh (15 miles north-west), Ellon (15 miles south-west), Mintlaw (9 miles west), Cruden Bay (7 miles south-west), Inverallochy (13 miles north-west) and Longside (6 miles west).
Landmarks near Port Henry
We visit homes around Peterhead and Union Bar. Well-known places in the area include Keith Inch Castle (0.5 miles south) and HM Prison Peterhead (1.3 miles south). Open spaces near Port Henry include Meet Hill.
Repairing versus replacing in Port Henry
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
What you get with us
- Usually one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- We will tell you if it’s not worth repairing
- One price list for the entire UK
Read our prices page and bath cost comparison.
When we would advise against a repair
It helps to know what we can’t do:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
