Aberdeenshire · Scotland
Bath chip & crack repair in Fraserburgh, Aberdeenshire
Damaged bath in Fraserburgh? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
Bath repair at your home in Fraserburgh
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Common call-outs are for a kit repair that didn’t last and a hole punched through by something heavy, in whirlpool & spa baths, pressed steel enamel and cast iron enamel.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.
- Area
- Fraserburgh (AB43)
- Area hub
- Aberdeenshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We are used to working with agents and managing companies. Just send photos, the address and how to get access.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Also near Fraserburgh
More services for Fraserburgh
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Common questions in Fraserburgh
Will the repair show?
We aim for a repair you cannot easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
How long before I can use the bath?
Typically within a day, though it depends on what we’ve done.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Do you cover Fraserburgh?
Yes, we do. We send a technician to Fraserburgh for every job, and the price is the same as everywhere else.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you repair a crack in an acrylic bath?
Often, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
What bath repair costs
Prices start from £95. We price every job individually. The main factors are:
- How hard the colour is to match
- The material and finish
- How easy the damage is to reach
- Whether we combine several jobs
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
How to get a fixed quote
Most quotes are done from pictures alone. To help us price it:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- Natural light rather than flash
- A picture taken from further back
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Should you replace it?
People often assume a cracked or chipped bath has to come out. Typically it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- Everything repaired in place
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Honest advice, even when it means no job
Read our full price list or resurfacing vs replacement cost guide.
Keeping it looking good
So the finish stays in good condition:
- Clean with warm water and a mild detergent
- Get a dripping tap fixed promptly
- Protect the bath with a towel when doing jobs nearby
- Give the bath a quick rinse after use
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
What we’re called out for in Fraserburgh
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: the bath isn’t properly supported, so it flexes under weight.
The most common problems we’re called about are:
- Scuffs and scratches in the surface
- Damage beneath the taps
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
Questions to ask before you book
- How to care for the finish
- How your room will be protected
- How soon you can use it again
- What preparation is included
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes two to three hours for most chips. If anything looks different from your photos, we will talk to you before going ahead.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
- Keep a parking space free if you can
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Covering Fraserburgh
Fraserburgh is about 37 miles north of Aberdeen, in Aberdeenshire. Book a date that suits you, and we’ll give you an arrival time in advance, so there is no waiting around. We work in all 161 towns and villages across Aberdeenshire, from the larger towns to small villages.
Jobs in AB43 are booked in the same way as anywhere else. You’ll find streets such as High Street, Main Street and Thompson Terrace, and we cover them all. With the A90 and A98 close by, Fraserburgh is easy for our technicians to reach. If you are just outside Fraserburgh, we cover Broadsea (1 mile north), Sandhaven (2 miles north-west), Pittulie (2 miles north-west), Memsie (3 miles south-west) and Inverallochy (3 miles east). Further out, we also cover Peterhead (15 miles south-east), Roanheads (15 miles south-east), Clerkhill (15 miles south-east), Port Henry (15 miles south-east), Mintlaw (11 miles south) and Longside (12 miles south). Being one of Aberdeenshire’s larger places, Fraserburgh sees plenty of our work.
Near you in Fraserburgh
Typical jobs here are in homes near The Saltoun Inn, Fraserburgh Academy and Fraserburgh. Nearby you will also find Fraserburgh Hospital (under half a mile north) and Fraserburgh Heritage Centre (0.9 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
