Warwickshire · England

Bath Repair in Clifford Chambers

Bath repair for Clifford Chambers, without a refit. Get a fixed price from your photos, then we come to you.

  • Repairs from £95
  • Rust spots around the plughole
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Clifford Chambers

How we handle bath repair in Clifford Chambers

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about impact holes in acrylic and scratches you can feel with a fingernail.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
Clifford Chambers (CV37)
Area hub
Warwickshire
Warranty
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026

Should you replace it?

Many people think a damaged bath means a new one. Generally it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • Fixed prices from your pictures
  • We come to you, anywhere in the UK
  • Everything repaired in place
  • One-year guarantee on every repair

Read our pricing or resurfacing vs replacement cost guide.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

For landlords and businesses

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Our work in Clifford Chambers

Clifford Chambers is about 2 miles south of Stratford-upon-Avon, in Warwickshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 324 towns and villages in Warwickshire, from the larger towns to small villages. We work right across the region, from Clifford Chambers to Birmingham (about 22 miles away).

Every address in CV37 is within our area, from the main roads to the quietest streets. Whether you live on Orchard Place, Milcote Road and Campden Road or a nearby road, we can come to you. Neighbouring places we cover include Shottery (1 mile north), Preston on Stour (2 miles south), Luddington (2 miles west), Stratford-upon-Avon (2 miles north) and Weston-on-Avon (2 miles west). We also work in nearby towns such as Warwick (10 miles north-east), Royal Leamington Spa (12 miles north-east), Leamington Spa (11 miles north-east), Kenilworth (14 miles north-east), Southam (15 miles east) and Alcester (7 miles north-west).

Near you in Clifford Chambers

Our clients here include homes close to Bancroft Gardens, New Inn and Church of St Helen. Clifford Chambers’s nearest station is Stratford-upon-Avon station, about 1.8 miles north of the centre. Further afield, we also cover the area around Stratford Hospital (1.8 miles north) and Old Stratford and Drayton (2.6 miles north-west).

Map of Clifford Chambers © OpenStreetMap contributors

How it works

The work is clean and fairly quiet. Protection goes down first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to look after it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Preparing for the visit

  • Tell us about parking, stairs or access
  • Point us to the nearest place to park
  • Plan for the room to be out of bounds to pets and children

Get a quote

To get a price, send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.

Send photos for a quote

Read more

Do you need bath repair in Clifford Chambers?

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

People generally call us when they notice one of these:

  • Impact holes in acrylic
  • Rusty patches near the plughole
  • Damage done while the bathroom was being fitted
  • Damage beneath the taps

What to look for in a quote

  • Who turns up on the day
  • How the room is protected while they work
  • Whether they match the colour on site
  • How changes to the job are handled

Choosing a repair company

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

When a repair isn’t the answer

Some jobs are not right for a repair, including:

  • A steel bath rusted through
  • A bath worn all over, where resurfacing makes more sense
  • Acrylic cracks with no access behind them

If in doubt, send photos and we will say what we think.

What we work on

  • Whirlpool & spa baths
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Cast iron enamel

Prices and what affects them

Prices start from £95. Quotes are free and the price is fixed. What we take into account:

  • How many areas need work
  • The material and finish
  • How hard the colour is to match
  • How many items we do on one visit

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your photos

It only takes a minute to photograph the damage. Try to send:

  • Whether it’s been repaired or coated before
  • Where you are, by postcode
  • Natural light rather than flash
  • Something in shot to show the size

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.

Questions from Clifford Chambers

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Can you quote from photos?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is a bath repair permanent?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.

Do I have to be there?

Yes. We need access to the room while we work, at a time we agree with you.

How do I book?

Use the quote form or ring 0345 017 0787.

When can you do it?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.