Warwickshire · England
Bath Repair for Preston on Stour homes
Our technicians come to Preston on Stour for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Holes from dropped items
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
How we handle bath repair in Preston on Stour
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. We work on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and people most often call us about chips caused by builders and chips on the rim or sides.
Every repair comes with a one-year guarantee.
- Area
- Preston on Stour (CV37)
- Region
- Warwickshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Preston on Stour
Preston on Stour is about 3 miles south of Stratford-upon-Avon, in Warwickshire. Jobs in Preston on Stour are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Preston on Stour is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Preston on Stour to Birmingham (about 24 miles away).
We cover every part of CV37 and the streets around it. Neighbouring places we cover include Clifford Chambers (2 miles north), Long Marston (2 miles south-west), Lower Quinton (2 miles south-west), Shottery (3 miles north) and Upper Quinton (3 miles south-west). Further out, we also cover Warwick (11 miles north-east), Royal Leamington Spa (12 miles north-east), Stratford-upon-Avon (3 miles north), Leamington Spa (12 miles north-east), Kenilworth (15 miles north) and Southam (15 miles north-east).
Local landmarks in Preston on Stour
Locally, our jobs take us to homes close to Church of St Mary and the streets around them. For rail, the closest station is Stratford-upon-Avon station, about 3.3 miles north. Well-known places in the area include Tudor World (3 miles north) and Temple Hill (4.2 miles north).
Landlords, agents and businesses in Preston on Stour
If you manage property in Preston on Stour, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Common problems we fix in Preston on Stour
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
It’s worth getting a quote if you see:
- Scratches you can feel with a fingernail
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
Comparing quotes
- How to care for the finish
- What the guarantee covers, and for how long
- If travel is included in the price
- How long it needs to cure
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take a morning or an afternoon, and you’re welcome to carry on with your day while we work.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
How to prepare
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Advice
Places near Preston on Stour
More services for Preston on Stour
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Keep metal cans and razors off the surface
- If an acrylic bath flexes, have its feet adjusted
There’s nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
FAQs for Preston on Stour
Can you repair a hole in a bath?
Generally. Photos of the hole and the underside help us check.
Is there any odour?
There may be a mild smell during the work.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Are there extra charges for Preston on Stour?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
What information do you need?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Why repair rather than replace?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Prices start from £95. The price reflects the work involved, not where you live. You will see the full price before booking.
Why book with us
- Fixed prices from your pictures
- We’ll tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- Nothing taken out or refitted
Read our prices page and resurfacing vs replacement cost guide.
What a repair cannot fix
A repair isn’t right for every job, including:
- Leaking fittings, which need a plumber
- Cracks in parts of an acrylic bath we cannot get to from below
- Metal that has corroded all the way through
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- How easy the damage is to reach
- Unusual colours or finishes
- How many items we do on one visit
- The material and finish
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
Two or three clear photos are generally enough. It helps if you send:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- Where you are, by postcode
- Daylight if possible, and no flash reflection
To get a price, send two or three pictures through our quote form or ring us. We will say right away whether it can be repaired.
About our accreditations · Every repair comes with a one-year guarantee.
