Dumfries and Galloway · Scotland

Bath chip & crack repair in Closeburn, Dumfries and Galloway

Our technicians come to Closeburn for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • An old repair that has yellowed or come loose
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Closeburn homes

Bath repair in Closeburn, done in place

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Common call-outs are for chips under the taps and snagging damage from a refit, across whirlpool & spa baths, roll-top & freestanding and cast iron enamel.

Every job is backed for twelve months. If something goes wrong with the work, we come back.

Where
Closeburn (DG3)
County
Dumfries and Galloway
Guarantee
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

When to call us in Closeburn

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Typical reasons for a call-out include:

  • Scuffs and scratches in the surface
  • Impact holes in acrylic
  • A chip where the taps sit
  • An old repair that has yellowed or come loose

Before booking anyone

  • Whether the price is fixed and includes VAT
  • Who will actually do the work
  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price

10 questions to ask before you book

FAQs for Closeburn

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Do you cover the whole of Dumfries and Galloway?

The entire UK, including all of Dumfries and Galloway. Send your postcode with your photos and we’ll confirm dates.

What information do you need?

Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is a bath repair permanent?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Can I get a quote without a visit?

Yes, almost always. Clear photos let us give you a fixed quote without visiting.

How much does bath repair cost in Closeburn?

Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.

Do you work in Closeburn?

Yes. We cover the whole UK and travel to Closeburn and the rest of Dumfries and Galloway. Send photos and we will quote, or call 0345 017 0787.

Prices and what affects them

Prices start from £95. A fixed quote means you know the cost before booking. We take into account:

  • Doing more than one item at once
  • How hard the colour is to match
  • How easy the damage is to reach
  • The size and number of damaged areas

We charge the same wherever you are, with no extra for Closeburn. What changes the price is the job itself: the material, the amount of damage and how many items.

Send pictures for a quote

It only takes a minute to photograph the damage. Try to send:

  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • Your postcode, so we can check dates
  • The material, if you know it

Most clients in Closeburn get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

How it works

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, typically by the next day, the bath is ready to use.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children

Get a quote

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.

Send photos for a quote

Advice

Our work in Closeburn

Closeburn is about 11 miles north-west of Dumfries, in Dumfries and Galloway. Jobs in Closeburn are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Closeburn is one of 138 towns and villages in Dumfries and Galloway where we work. Our nearest city page is Glasgow, about 49 miles away.

We work across the DG3 postcode area. From Castle Crescent, Firmuir Avenue and Shawsholm Road or a nearby road, a technician can come to you. If you are just outside Closeburn, we cover Keir Mill (2 miles west), Thornhill (2 miles north-west), Penpont (3 miles north-west), Auldgirth (4 miles south) and Carronbridge (4 miles north-west). Within a short drive, we also cover Dumfries (11 miles south-east), Moffat (14 miles north-east), Heathhall (10 miles south-east), Newbridge Drive (10 miles south-east), Lochmaben (13 miles south-east) and Troqueer (12 miles south-east).

What’s near Closeburn

Typical jobs here are in homes near Closeburn Parish Church and Wallace Hall Academy and the streets around them. A little further out are Barjarg Tower (1.7 miles south-west) and Dr. Griersons Museum (2.3 miles north-west). The countryside around Closeburn includes Loch Ettrick.

Map of Closeburn © OpenStreetMap contributors

DIY repairs versus a professional job

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

When we’d advise against a repair

Some problems need a builder, plumber or fitter rather than us:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • Flexing caused by a failed cradle or loose feet

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Closeburn

  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths

Work for landlords and builders

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Why repair rather than replace?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • We will tell you if it’s not worth repairing
  • A fixed quote before you book
  • One-year guarantee on every repair
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our pricing or guide to resurfacing and replacement costs.

Different materials, different repairs

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.