Highland · Scotland
Bath Repair for Clynelish homes
Bath repair for Clynelish, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- A chipped rim or side
- A hole punched through by something heavy
Bath repair in Clynelish, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, typically in a single visit. If you are dealing with damage beneath the taps and a kit repair that didn’t last, we can help, whatever the material.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Area
- Clynelish (KW9)
- Area hub
- Highland
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Clynelish
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send pictures.
What areas do you cover?
The whole UK, including all of Highland. Send your postcode with your pictures and we will offer you dates.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Is a cracked acrylic bath repairable?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Common problems we fix in Clynelish
A cracked acrylic bath generally wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- Chips on the rim or sides
- Snagging damage from a refit
- A chip where the taps sit
Questions to ask before you book
- How long it needs to cure
- How the room is protected while they work
- Whether a trained technician does the job
- The length of the guarantee and what it covers
Clynelish and the surrounding area
Clynelish is about 30 miles north of Forres, in Highland. Anywhere in KW9, a technician comes to you. Clynelish is one of 253 places in Highland where we work.
Our visits in KW9 work the same way as everywhere else we cover. You’ll find streets such as Victoria Road, Braambury Road and Clynelish Road. We also travel to Dalchalm (1 mile north-east), Brora (1 mile south), Golspie (6 miles south-west), Littleferry (8 miles south-west) and Embo (9 miles south-west). If you are somewhere remote, call first so we can plan the visit.
Landmarks near Clynelish
Typical jobs here are in homes near Brora, among other places. The closest station to Clynelish is Brora station, about 0.7 miles south of the centre. Further afield, we also cover the area around Dunrobin Castle (4.3 miles south-west) and Lawson Memorial Hospital (5.9 miles south-west). Open spaces near Clynelish include Loch an Tubairnaich.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
- Let the surface dry out before the visit
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Related advice
What affects the price in Clynelish
Repairs from £95. Prices are worked out job by job. The main factors are:
- The material and finish
- Doing more than one item at once
- Previous DIY repairs that have to come out
- How hard the colour is to match
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Send pictures for a quote
Two or three clear photos are normally enough. Try to include:
- Any details about the material
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
Upload a picture of the damage and one of the whole item, and tell us you’re in Clynelish, and we’ll reply with a fixed price.
Should you replace it?
A new bath brings a chain of other jobs: tiles along the rim normally crack when it comes out, a new panel is frequently needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Why book with us
- Work done at your home or business
- Honest advice, even when it means no job
- Colour-matched on site
- CHAS and Constructionline accredited
See our full price list and guide to resurfacing and replacement costs.
Nearby places to Clynelish
More services for Clynelish
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Have new chips seen to early
- Make sure an acrylic bath is firm underfoot
- Don’t leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
Send us photos and we will tell you honestly.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
