Moray · Scotland

Bath chip & crack repair in Forres, Moray

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Forres. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Chips under the taps
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Forres homes

When we would advise against a repair

A repair is not right for every job, for example:

  • Leaking fittings, which need a plumber
  • A bath worn all over, where resurfacing makes more sense
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us pictures and we will tell you honestly before you book.

Surfaces we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

Bath repair at your home in Forres

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Whether it’s rusty patches near the plughole and deep scratches in acrylic, we can help, on acrylic, pressed steel enamel and whirlpool & spa baths alike.

You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.

Location
Forres (IV36)
Area hub
Moray
Cover
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

What affects the price in Forres

Prices start from £95. We price every job individually, from your photos. The main factors are:

  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • What kind of damage it is
  • Whether we combine several jobs

A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.

Send photos for a quote

Photographing the damage takes a minute. Try to send:

  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare

To get a price, send a couple of pictures using our quote form or call us. We’ll say straight away if a repair is the right fix.

Aftercare tips

It’s all simple stuff:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Don’t leave a fresh chip for long
  • Put a towel in the bath if you’re working above it
  • Rinse it down after each bath

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

Materials and what they mean for the repair

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Can I fix it myself?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

How it works

We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes two to three hours for most chips. We leave the room clean and ready to use once it has cured.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Tell us about parking, stairs or access
  • Point us to the nearest place to park

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.

Get a fixed price

Advice

Your questions about bath repair in Forres

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Is there any odour?

There can be some smell while we work, which is why we ventilate. It fades as everything cures.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

Which areas do you work in?

We work UK-wide. Our prices are the same everywhere.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

Can you match an avocado or pink bath?

Yes. The colour is mixed on site to suit your bath, including older coloured suites.

Can you repair something that’s been repaired before?

Most of the time. Tell us what was done before.

When can I have a bath again?

Most baths can be used the following day. We’ll tell you the exact curing time when we finish.

For landlords and businesses

Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Forres and nearby

Forres is about 12 miles west of Elgin, in Moray. We travel to homes and businesses in Forres, so you don’t need to take anything anywhere. Forres is one of 58 towns and villages in Moray we cover.

We cover every part of IV36 and the streets around it. That includes homes on Church Road, Market Street and High Street and the roads around them. Forres sits on or near the A96 and A940, so getting to you is simple. Nearby, we also work in Red Craig (1 mile south-west), Mundole (2 miles south-west), Rafford (2 miles south-east), Dyke (3 miles west) and Moor of Granary (3 miles south-east). Larger places within reach include Elgin (12 miles east), Lossiemouth (14 miles north-east), Ashgrove (12 miles east), Burghead (8 miles north-east), Hopeman (10 miles north-east) and Lhanbryde (15 miles east). Being one of Moray’s larger places, Forres is somewhere we visit frequently. Some remote addresses need extra planning, so it’s best to call first.

Around Forres

Locally, our jobs take us to homes close to Andersons Primary School, Red Lion Hotel and Roysvale Park and the streets around them. Also close by are Castlehill Church (less than half a mile north) and Forres Academy (under half a mile south-east). For rail, the closest station is Forres station, about 0.5 miles north-west of the centre. A little further out are Forres Castle (under half a mile north) and Leanchoil Hospital (1 mile east). For a walk, there is Sanquhar Loch and Cluny Hill.

Map of Forres © OpenStreetMap contributors

When to call us in Forres

A cracked acrylic bath generally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until it cracks.

Look out for these signs:

  • A kit repair that didn’t last
  • Chips along the edge of the bath
  • Damage done while the bathroom was being fitted
  • A chip where the taps sit

What to look for in a quote

  • How long it needs to cure
  • What the guarantee covers, and for how long
  • Who turns up on the day
  • Whether the colour is mixed to match

10 questions to ask before you book

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.