Highland · Scotland
Bath Repair in Skelbo Muir
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Skelbo Muir, with a one-year guarantee on every repair.
- Repairs from £95
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose

Bath repair in Skelbo Muir without replacing anything
We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include chips on the rim or sides and a chip where the taps sit, across cast iron enamel, pressed steel enamel and whirlpool & spa baths.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.

- Area
- Skelbo Muir (IV25)
- Region
- Highland
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Give the bath a quick rinse after use
- Store metal items away from the bath
- Get any new chip repaired before it rusts
- Keep abrasive pads and gritty cleaners away from the bath
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
Other services in Skelbo Muir
The process
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Make sure the room can be ventilated
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you are under no obligation.
Read more
About Skelbo Muir
Skelbo Muir is about 24 miles north of Nairn, in Highland. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Skelbo Muir is one of 253 places in Highland we cover.
Here we cover the IV25 postcode area. We also cover the places around Skelbo Muir: Littleferry (1 mile north-east), Embo (2 miles south-east), Hilton (2 miles south-east), Camore (3 miles south) and Dornoch (3 miles south). We also work in nearby towns such as Tain (8 miles south), Brora (9 miles north-east) and Balintore (12 miles south). Remote and island addresses take a little more planning, so it’s best to call first.
Landmarks near Skelbo Muir
For rail, the closest station is Golspie station, roughly 3.9 miles north-east. A little further out are Lawson Memorial Hospital (4 miles north-east) and Historylinks Museum (3 miles south). Green spaces nearby include Loch Fleet National Nature Reserve and Ben Bhraggie.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
- Dust sheets down, tidy finish
- Everything repaired in place
Read our full price list and guide to resurfacing and replacement costs.
How we price bath repair
Prices start from £95. There’s no charge for travel to Skelbo Muir. The price comes down to:
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- The postcode, so we can plan the visit
- A wider photo showing the entire bath
- Something in shot to show the size
- Natural light rather than flash
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
If you manage property in Skelbo Muir, we’ll quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Skelbo Muir
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Your questions about bath repair in Skelbo Muir
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a photo.
How long before I can use the bath?
Most baths can be used the following day. We confirm the time before we leave.
Can you quote from photos?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
About our accreditations · Every repair comes with a one-year guarantee.

