Telford and Wrekin · England
Bath Repair in Coalmoor
Bath repair across Coalmoor and nearby, generally in one visit and guaranteed for a year.
- Repairs from £95
- Scratches you can feel with a fingernail
- Damage beneath the taps
Your questions about bath repair in Coalmoor
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
How do I get a price for bath repair in Coalmoor?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Telford and Wrekin.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Bath repair at your home in Coalmoor
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. A repair stops both. We regularly repair roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are a kit repair that didn’t last and chips on the rim or sides.
Every job is backed for twelve months in Coalmoor and everywhere else. If something goes wrong with the work, we come back.
- Area
- Coalmoor (TF4)
- County
- Telford and Wrekin
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
Once the work has cured, treat it gently:
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Ensure an acrylic bath is firm underfoot
- Clean with warm water and a mild detergent
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Landlord and trade work in Coalmoor
We work for landlords, letting agents and housing providers in Coalmoor as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How we price bath repair
Repairs from £95. Every quote is fixed and free. What we look at:
- The material
- The colour and finish to match
- Where the damage is and how we get to it
- The size and number of damaged areas
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
How to get a fixed price
The better the pictures, the more accurate the price. Here’s what helps:
- Any details about the material
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- Your postcode, so we can check dates
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
What a repair can’t fix
It helps to know what we can’t do too:
- Leaking fittings, which need a plumber
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the day after, the bath is ready to use.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
- Point us to the nearest place to park
Getting a price
For a price in Coalmoor, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Related advice
When to call us in Coalmoor
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: the bath is not properly supported, so it flexes under weight.
Customers normally contact us about:
- Rusty patches near the plughole
- A chipped rim or side
- Scratches you can feel with a fingernail
- Holes from dropped items
Questions to ask before booking
- Whether the price is fixed and includes VAT
- How long it needs to cure
- What prep work is covered
- How the colour is matched
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Other services in Coalmoor
About Coalmoor
Coalmoor is about 3 miles south-west of Telford, in Telford and Wrekin. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Coalmoor is one of 79 towns and villages in Telford and Wrekin we cover. We work right across the region, from Coalmoor to Birmingham (29 miles away).
We cover every part of TF4 and the streets around it. We also cover the places around Coalmoor: Little Wenlock (1 mile west), Buildwas (2 miles south-west), Cluddley (3 miles north-west), Wyke (3 miles south) and Leighton (3 miles west). We also work in nearby towns such as Telford (3 miles north-east), Wellington (3 miles north), Oakengates (3 miles north-east), Newport (9 miles north-east), St George’s (4 miles north-east) and Priorslee (4 miles north-east).
Around Coalmoor
We visit homes around Lightmoor Village Primary School, The Telford Langley School and Church of St Lawrence. For rail, the closest station is Telford Central station, roughly 3 miles north-east. Well-known places in the area include Princess Royal Hospital (3.8 miles north) and New Coracle Shed (1.7 miles south). For a walk, there is The Ercall.
About our accreditations · Every repair comes with a one-year guarantee.
