Telford and Wrekin · England

Bath Repair in Cold Hatton Heath

Chip and crack repairs to enamel, acrylic and cast iron baths in Cold Hatton Heath, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • A chipped rim or side
  • Scuffs and scratches in the surface
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Cold Hatton Heath

Bath repair in Cold Hatton Heath without replacing anything

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Our technicians work on cast iron enamel, pressed steel enamel and whirlpool & spa baths, and people most often call us about chips under the taps and a cracked acrylic bath.

Big or small, you get the same one-year guarantee.

Area
Cold Hatton Heath (TF6)
Area hub
Telford and Wrekin
Cover
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

What happens on the day

It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a few hours, depending on the damage. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Let us know which floor the room is on
  • Have somewhere for us to park nearby if possible
  • Plan for the room to be out of bounds to pets and children

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Get a free quote

Read more

Common problems we fix in Cold Hatton Heath

Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.

The most common problems we are called about are:

  • Chips along the edge of the bath
  • Rusty patches near the plughole
  • Deep scratches in acrylic
  • A cracked acrylic bath

What to look for in a quote

  • What happens if they find more damage
  • Who turns up on the day
  • How long the guarantee is and what it covers
  • Whether they match the colour on site

Choosing a repair company

What we can’t put right

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we cannot get to from below

Not sure? Send pictures and we will give you a straight answer before you book.

Materials we work on in Cold Hatton Heath

  • Acrylic
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Roll-top & freestanding

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Cold Hatton Heath and the surrounding area

Cold Hatton Heath is about 7 miles west of Newport, in Telford and Wrekin. Wherever you are in the TF6 postcode area, we come to you. Our repair technicians cover 79 places across Telford and Wrekin. Our nearest city page is Birmingham, about 35 miles away.

Our visits in TF6 work the same way as everywhere else we cover. From Middle Lane, Shop Lane and Stars Lane or a nearby road, a technician can come to you. If you are just outside Cold Hatton Heath, we cover Cold Hatton (1 mile west), Heath Lanes (1 mile west), Ellerdine Heath (1 mile north-west), Waters Upton (1 mile south) and Crudgington (2 miles south). Further out, we also cover Telford (7 miles south-east), Wellington (6 miles south), Dawley (9 miles south), Oakengates (7 miles south-east), Newport (7 miles east) and The Rock (8 miles south-east).

Near you in Cold Hatton Heath

Locally, our jobs take us to homes close to Church of St. John the Baptist and The Seven Stars Inn. Further afield, we also cover the area around Princess Royal Hospital (5.3 miles south) and Moreton Corbet Castle (4.6 miles west).

Map of Cold Hatton Heath © OpenStreetMap contributors

Cold Hatton Heath: your questions answered

Is it messy?

No. The work area is masked and covered, and we leave the room clean.

Can you do more than one item on the same visit?

Of course, and it generally saves money. Send pictures of everything together and you will get one combined price.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you repair something that is been repaired before?

Most of the time. Tell us what was done before.

Will the repair last?

Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Repair or replace in Cold Hatton Heath?

Many people think a damaged bath means a new one. Typically it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Our bath repair starts from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why us?

  • Same prices wherever you are
  • Colour-matched on site
  • Most jobs done in one visit
  • We come to you, anywhere in the UK

Take a look at our pricing and bath cost comparison.

How we price bath repair

Repairs from £95. Each job gets its own fixed quote. These are the things that affect it:

  • How many items we do on one visit
  • Access to the area
  • How hard the colour is to match
  • How many areas need work

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

Quotes from your photos

You can take the photos on your phone. Ensure they show:

  • A coin beside the damage so we can judge size
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • Details of any past repairs

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

What your bath is made of matters

Acrylic

Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.