Telford and Wrekin · England
Bath Repair for Cold Hatton homes
Our technicians come to Cold Hatton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- An old repair that has yellowed or come loose
How we handle bath repair in Cold Hatton
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Typical jobs include a chipped rim or side and rust spots around the plughole, across whirlpool & spa baths, cast iron enamel and acrylic.
All our work is covered by a one-year guarantee.
- Location
- Cold Hatton (TF6)
- County
- Telford and Wrekin
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Nearby places to Cold Hatton
Other services in Cold Hatton
Cold Hatton questions
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Cold Hatton.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How much does bath repair cost in Cold Hatton?
Prices start from £95. Every job gets a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
Some materials have a smell while they’re applied. It fades as everything cures.
Do you cover the whole of Telford and Wrekin?
All of Telford and Wrekin, and the rest of the UK. There’s no extra charge for travel.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you work in Cold Hatton?
Yes. We work across the UK and come to Cold Hatton and the rest of Telford and Wrekin. Send us photos for a fixed quote, or call 0345 017 0787.
Cold Hatton and nearby
Cold Hatton is about 8 miles west of Newport, in Telford and Wrekin. Our repair technicians come to customers in Cold Hatton, so nothing has to leave your home. We work in 79 places across Telford and Wrekin. Our jobs stretch from Cold Hatton to Birmingham (35 miles away).
Here we cover the TF6 postcode area. We also travel to Heath Lanes (1 mile west), Cold Hatton Heath (1 mile east), Ellerdine Heath (1 mile north-west), Waters Upton (1 mile south-east) and Crudgington (2 miles south). We also work in nearby towns such as Telford (8 miles south-east), Wellington (6 miles south), Dawley (9 miles south-east), Oakengates (8 miles south-east), Newport (8 miles east) and The Rock (8 miles south-east).
What’s near Cold Hatton
Typical jobs here are in homes near The Seven Stars Inn and All Hallows. A little further out are Princess Royal Hospital (5.5 miles south) and Moreton Corbet Castle (4.1 miles west).
Work for landlords and builders
If you manage property in Cold Hatton, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Repair or replace in Cold Hatton?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- One price list for the whole UK
- Technicians who travel to you, UK-wide
- Everything repaired in place
- Colours mixed by hand to suit your surface
Take a look at our full price list and bath cost comparison.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Signs you need bath repair in Cold Hatton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. We repair snagging damage like this regularly.
These are the problems we are asked about most:
- Impact holes in acrylic
- Chips along the edge of the bath
- Snagging damage from a refit
- Cracks in an acrylic bath
What to look for in a quote
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
- How the room is protected while they work
The process
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, typically by the next day, the bath is ready to use.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
- Have somewhere for us to park nearby if possible
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Advice
What affects the price in Cold Hatton
Prices start from £95. There is no charge for travel to Cold Hatton. The price depends on:
- How many items we do on one visit
- Previous DIY repairs that have to come out
- The material
- Access to the area
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Two or three clear photos are usually enough. Try to include:
- A picture taken from further back
- The postcode, so we can plan the visit
- The material, if you know it
- Something in shot to show the size
If you are in Cold Hatton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Aftercare tips
Looking after the surface is easy:
- Rinse it down after each bath
- A dripping tap stains enamel, so fix it early
- Put a towel in the bath if you’re working above it
- Use a soft cloth and washing-up liquid for everyday cleaning
There’s nothing special to do after a repair. Skip bleach and gritty creams.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
