Telford and Wrekin · England
Bath Re-enamelling in Cold Hatton Heath
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Cold Hatton Heath. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
When to call us in Cold Hatton Heath
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
If you can see any of these, send us a picture:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Staining under the taps and around the waste
- Wear marks under the taps
Questions to ask before booking
- Who turns up on the day
- When it can be used again
- What the guarantee covers, and for how long
- What aftercare is recommended
Bath re-enamelling in Cold Hatton Heath, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Our technicians work on cast iron baths, pressed steel baths and basins & shower trays, and people most often call us about chips and rust in more than one place and an outdated colour you’d like to change.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Location
- Cold Hatton Heath (TF6)
- County
- Telford and Wrekin
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
It helps to know what we cannot do too:
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer before you book.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Also near Cold Hatton Heath
More services for Cold Hatton Heath
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
How the visit works
We agree an arrival time beforehand. Once we are there, the work takes the best part of a day for most jobs. The room is left tidy and you’ll know when it can be used.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
- Clear the area around the damage
Ask for a price
To get a price, send two or three photos using our quote form or ring us. We’ll say immediately if a repair is the right fix.
Related advice
Landlords, agents and businesses in Cold Hatton Heath
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will arrange it.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Aftercare tips
Most damage we see is avoidable. A few tips:
- Respect the curing time we give you
- Don’t let dyes or oils sit on the finish
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Prices and what affects them
Resurfacing from £350. You’ll know the full cost before booking. We look at:
- Whether we combine several jobs
- Previous DIY repairs that have to come out
- The material
- The size and number of damaged areas
Our prices are the same across the UK, so there’s no premium for Cold Hatton Heath. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Cold Hatton Heath and nearby
Cold Hatton Heath is about 7 miles west of Newport, in Telford and Wrekin. From the centre of Cold Hatton Heath to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Cold Hatton Heath is one of 79 places in Telford and Wrekin where we work. Our jobs stretch from Cold Hatton Heath to Birmingham (35 miles away).
Postcode districts we cover here: TF6. That includes homes on Middle Lane, Shop Lane and Stars Lane and the roads around them. Close by, we cover Cold Hatton (1 mile west), Heath Lanes (1 mile west), Ellerdine Heath (1 mile north-west), Waters Upton (1 mile south) and Crudgington (2 miles south). Further out, we also cover Telford (7 miles south-east), Wellington (6 miles south), Dawley (9 miles south), Oakengates (7 miles south-east), Newport (7 miles east) and The Rock (8 miles south-east).
What’s near Cold Hatton Heath
Our customers here include homes close to Church of St. John the Baptist and The Seven Stars Inn. Other landmarks nearby include Princess Royal Hospital (5.3 miles south) and Moreton Corbet Castle (4.6 miles west).
Questions from Cold Hatton Heath
Do you work in Cold Hatton Heath?
Yes. We work across the UK and come to Cold Hatton Heath. Send us pictures for a fixed quote, or call 0345 017 0787.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Are there extra charges for Cold Hatton Heath?
There is no separate call-out charge. Your fixed price includes everything.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
