Worcestershire · England
Bath Repair for Coppicegate homes
We travel to Coppicegate for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips along the edge of the bath
- Snagging damage from a refit
What happens on the day
We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a few hours, depending on the damage, and we leave the room as we found it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Keep a parking space free if you can
Getting a price
If you’re in Coppicegate and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
About our bath repair in Coppicegate
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We’re often asked to fix chips caused by builders and rust spots around the plughole, on acrylic, whirlpool & spa baths and pressed steel enamel.
Big or small, you get the same one-year guarantee.
- Where
- Coppicegate (DY12)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath repair in Coppicegate
Can you repair several things at once?
Of course, and it normally saves money. Just add the extra items to your pictures and we will quote them together.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Worcestershire.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you price it without visiting?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
Keeping it looking good
Most damage we see is avoidable. A few tips:
- Cover the bath during DIY or decorating
- Keep metal cans and razors off the surface
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
About Coppicegate
Coppicegate is about 6 miles west of Kidderminster, in Worcestershire. Wherever you are in the DY12 postcode area, we carry out the work at your property. We work in 376 places in Worcestershire. Our nearest city page is Birmingham, about 21 miles away.
Here we cover the DY12 postcode area. Close by, we cover Buttonoak (1 mile south), Upper Arley (2 miles east), Netherton (2 miles north), Stanley (2 miles north) and Nash End (2 miles north-east). Larger places within reach include Kidderminster (6 miles east), Bromsgrove (15 miles south-east), Droitwich Spa (15 miles south-east), Stourport-on-Severn (7 miles south-east), Bewdley (4 miles south-east) and Chawson (14 miles south-east).
Near you in Coppicegate
Further afield, we also cover the area around Kidderminster Hospital and Treatment Centre (5.5 miles south-east) and Crundles Farm (3.5 miles south-east).
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- Cracks in acrylic we can’t reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Repair or replace: which is better?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Dust sheets down, tidy finish
- Everything repaired in place
- One price list for the whole UK
Take a look at our prices page and bath cost comparison.
Do you need bath repair in Coppicegate?
Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Look out for any of the following:
- Damage beneath the taps
- Scratches you can feel with a fingernail
- A chipped rim or side
- Damage done while the bathroom was being fitted
What to look for in a quote
- Whether the price covers travel
- How the colour is matched
- What happens if they find more damage
- Is the price fixed, and does it include VAT?
Places near Coppicegate
More services for Coppicegate
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
