Worcestershire · England

Bath Repair in Nash End

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Nash End and across Worcestershire. Free, fixed quotes from your photos.

  • Repairs from £95
  • Rust by the waste and overflow
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Nash End homes

Bath repair at your home in Nash End

Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you are dealing with an old repair that has yellowed or come loose and damage beneath the taps, we can help, whatever the material.

Every job is backed for twelve months in Nash End and everywhere else. We return to put right any problem with the work.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Area
Nash End (DY12)
Area hub
Worcestershire
Warranty
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

How the visit works

We agree an arrival time beforehand. On site, it takes a few hours, depending on the damage in most cases. The room is left tidy.

  1. We clean the area and remove any loose enamel or rust.
  2. Next we fill the damage and sand it smooth and level.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. We leave it to cure; you can typically use the bath the next day.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area

Getting a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Get a fixed quote

Related advice

Common problems we fix in Nash End

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Customers generally contact us about:

  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides
  • A hole punched through by something heavy
  • Damage beneath the taps

What your quote should include

  • How the room is protected while they work
  • The length of the guarantee and what it covers
  • How soon you can use it again
  • Whether the price covers travel

How to compare quotes

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

FAQs for Nash End

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Do you cover the entire of Worcestershire?

The entire UK, including all of Worcestershire. Send your postcode with your pictures and we’ll offer you dates.

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

Can pets and children be at home?

Just keep them out of the work area. We’ll let you know when it’s safe to use again.

Do you come to Nash End?

Yes, we do. We send a technician to Nash End for every job, and the price is the same as everywhere else.

Honest limits

We will not take on work that will not last, so here’s what a repair can’t put right:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • Rust that has eaten right through a steel bath
  • Water coming from the waste or taps rather than the bath

If in doubt, send photos and we’ll say what we think before booking.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic

How we price bath repair

Prices start from £95. Every quote is fixed and free. What we look at:

  • What kind of damage it is
  • Whether old repairs or coatings need taking off
  • The material and finish
  • How much damage there is

There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

You can take the photos on your phone, there’s no need for anything special. Make sure they show:

  • Daylight if possible, and no flash reflection
  • What it’s made of, if you know
  • A close-up of the damage, in focus
  • Something in shot to show the size

Email us pictures of the damage and one of the whole item, and tell us you are in Nash End, and we will come back with a fixed quote.

Repair or replace: which is better?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Nash End clients choose us

  • We come to you, anywhere in the UK
  • We leave the room as we found it
  • A year’s guarantee on all work
  • Colour mixed on the day to match

Take a look at our prices page or guide to resurfacing and replacement costs.

Our work in Nash End

Nash End is about 5 miles north-west of Kidderminster, in Worcestershire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Nash End is one of 376 places in Worcestershire where we work. Our jobs stretch from Nash End to Birmingham (19 miles away).

We cover every part of the DY12 postcode area and the streets around it. Nearby, we also work in Upper Arley (1 mile south), Good's Green (1 mile south-east), Romsley (1 mile north-east), Shatterford (1 mile east) and Stanley (2 miles north-west). Larger places within reach include Kidderminster (5 miles south-east), Bromsgrove (14 miles south-east), Droitwich Spa (14 miles south-east), Stourport-on-Severn (7 miles south), Bewdley (4 miles south) and Chawson (14 miles south-east).

What’s near Nash End

We visit homes around Severn Valley Country Park, Upper Arley CofE VC Primary School and Church of St Peter. Nearby you’ll also find Kidderminster Hospital and Treatment Centre (4.6 miles south-east) and Crundles Farm (3.1 miles south). The countryside around Nash End includes Kinver Edge.

Map of Nash End © OpenStreetMap contributors

Looking after it afterwards

Aftercare is simple:

  • Rinse the bath after use, especially in hard water areas
  • Store metal items away from the bath
  • Put a towel in the bath if you’re working above it
  • Check that an acrylic bath does not move when you stand in it

In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.